Digital Storage Oscilloscope PM3310

Philips; Eindhoven (tubes international!); Miniwatt

  • Year
  • 1981 ?
  • Category
  • Service- or Lab Equipment
  • Radiomuseum.org ID
  • 344483

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Number of Tubes
  • 1
  • Number of Transistors
  • Semiconductors present.
  • Wave bands
  • - without
  • Power type and voltage
  • Alternating Current supply (AC) / 100-120; 220-240 V & for memory 2 x 1.5 Volt
  • Loudspeaker
  • - - No sound reproduction output.
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: Digital Storage Oscilloscope PM3310 - Philips; Eindhoven tubes
  • Shape
  • Tablemodel, low profile (big size).
  • Dimensions (WHD)
  • 316 x 154 x 460 mm / 12.4 x 6.1 x 18.1 inch
  • Notes
  • Microprocessor controlled two channel 60 Mcs digital storage oscilloscope. 

    • Pre-trigger view
    • Storage of two channels with four different "event" signals.
    • IEC-bus optional (with the aid of PM3325)
    • X-Y- Plotter output
    • Trigger delay
    • Memory back-up using 2 x 1,5 V batteries
    • Corresponds to the later, more advanced model PM3311, but has a max. sample rate of only 50 Mcs, whereas PM3311 has 250 Mcs.

    Some of the ICs used in this instrument:

    • INTEL CPU: P8085
    • INTEL EPROMs: D2716
    • MOTOROLA RAMs: MCM51L01

    Only transistors, thyristors and diodes that were used in the power supply unit are listed. Each type was only listed once.

     

  • Net weight (2.2 lb = 1 kg)
  • 12 kg / 26 lb 6.9 oz (26.432 lb)
  • Mentioned in
  • - - Manufacturers Literature
  • Author
  • Model page created by Harald Giese. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model Digital Storage Oscilloscope is part of the collections of the following members.

 Forum