Stereo Amplifier SA-6500 II (2)
Pioneer Corporation; Tokyo
- Paese
- Giappone
- Produttore / Marca
- Pioneer Corporation; Tokyo
- Anno
- 1977/1978
- Categoria
- Amplificatore audio o mixer audio
- Radiomuseum.org ID
- 189631
Clicca sulla miniatura dello schema per richiederlo come documento gratuito.
- Numero di transistor
- 25
- Semiconduttori
- Principio generale
- Amplificatore audio
- Gamme d'onda
- - senza
- Particolarità
- Hi-Fi equipment
- Tensioni di funzionamento
- Alimentazione a corrente alternata (CA) / 110; 120; 220; 240 Volt
- Altoparlante
- - Questo apparecchio richiede altoparlante/i esterno/i.
- Potenza d'uscita
- 60 W (indistorta)
- Materiali
- Mobile di metallo
- Radiomuseum.org
- Modello: Stereo Amplifier SA-6500 II - Pioneer Corporation; Tokyo
- Forma
- Apparecchio per ripiani a scaffale (come i componibili HiFi).
- Dimensioni (LxAxP)
- 15 x 5.5 x 12.125 inch / 381 x 140 x 308 mm
- Annotazioni
-
A hi-fi stereo integrated amplifier housed in a metal case (optional wooden case) with continuous power output of 2 x 30 Watts RMS into 8 ohms or 4 ohms, with no more than 0.1% THD. Direct Coupled OCL, phono input uses TA7136P1 low noise preamplifier IC (one per channel). With rotary controls for Volume, Balance, Bass and Treble, rotary switch for Function (Phono, Tuner, Aux) and Speakers (Off, A, B, A+B), switches for Power, Tone bypass, Loudness, Tape Monitor 1 and 2 and a jack for Headphones. On the rear panel, RCA phono sockets for input Phono, Tuner, Aux, for input/output Tape1 and Tape2, on the HG and S versions a DIN socket for Tape2 Rec/Play, terminals for two pairs of loudspeakers (A, B) and four AC outlets (except the HG version). The HG version has an IEC mains socket and separate lead.
Specification Continuous Power Output
from 20Hz to 20,000Hz into 8Ω or 4Ω
with no more than 0.1% THD30 watts per channel, min. RMS THD (20Hz-20,000Hz)
Continuous rated power output
1 or 15 watts per channel
power output into 8Ω
0.1%
0.05%Intermodulation Distortion
Continuous rated power output
1 or 15 watts per channel
power output into 8Ω
0.1%
0.05%Output: Speaker
HeadphoneA,B,A+B
Low impedanceDamping Factor (20Hz-20kHz 8Ω) 30 Input Sensitivity/Impedance
PHONO
TUNER
AUX
TAPE PLAY1
TAPE PLAY2
2.5mV/50kΩ
150mV/50kΩ
150mV/50kΩ
150mV/50kΩ
150mV/50kΩOutput Level
TAPE REC1
TAPE REC2
150mV
150mVFrequency Response
PHONO (RIAA Equalization)
TUNER, AUX, TAPE PLAY
20Hz to 20,000Hz, ±0.3dB
10Hz to 40,000Hz +0dB,-1dBHum and Noise
(IHF, short circuited A Network)
PHONO
TUNER, AUX, TAPE PLAY
72dB
93dBSemiconductors: 2 ICs, 25 Transistors, 16 Diodes
Preceded by the Pioneer SA-6500 Stereo Amplifier.
Versions/Power requirements
HG Europe / 220/240V AC 50/60Hz with voltage selector
S General Export / 110/120/220/240V AC 50/60Hz with voltage selector
KU USA / 120V AC 60Hz
KC Canada / 120V AC 60HzPower consumption: 300W (HG), 90W (S), 100W (KU, KC)
- Peso netto
- 7.6 kg / 16 lb 11.8 oz (16.74 lb)
- Prezzo nel primo anno
- 170.00 CDN$
- Fonte dei dati
- - - Data from my own collection
- Bibliografia
- - - Manufacturers Literature (1977 Pioneer Hi-Fi Components catalogue)
- Letteratura / Schemi (1)
- - - Manufacturers Literature (1977/78 Pioneer Hi-Fi Stereo catalogue)
- Letteratura / Schemi (2)
- - - Manufacturers Literature (Service Manual Pioneer SA-6500 II)
- Letteratura / Schemi (3)
- - - Manufacturers Literature (Operating Instructions Pioneer SA-6500 II)
- Autore
- Modello inviato da Robert Weaver. Utilizzare "Proponi modifica" per inviare ulteriori dati.
- Altri modelli
-
In questo link sono elencati 1150 modelli, di cui 1134 con immagini e 201 con schemi.
Elenco delle radio e altri apparecchi della Pioneer Corporation; Tokyo
Collezioni
Il modello Stereo Amplifier fa parte delle collezioni dei seguenti membri.