Stereo Amplifier SA-700

Pioneer Corporation; Tokyo

  • Año
  • 1970
  • Categoría
  • Amplificador de audio o mezclador
  • Radiomuseum.org ID
  • 132852

 Especificaciones técnicas

  • Numero de transistores
  • 26
  • Semiconductores
  • Principio principal
  • Amplificador de Audio
  • Gama de ondas
  • - no hay
  • Especialidades
  • Hi-Fi equipment
  • Tensión de funcionamiento
  • Red: Corriente alterna (CA, Inglés = AC) / 110/117/130/220/240 Volt
  • Altavoz
  • - Este modelo usa altavoz exterior (1 o más).
  • Potencia de salida
  • 54 W (120 W max.)
  • Material
  • Metálico
  • de Radiomuseum.org
  • Modelo: Stereo Amplifier SA-700 - Pioneer Corporation; Tokyo
  • Forma
  • Unidad para estanteria.
  • Ancho, altura, profundidad
  • 370 x 118 x 314 mm / 14.6 x 4.6 x 12.4 inch
  • Anotaciones
  • A hi-fi stereo integrated amplifier housed in a metal case with continuous power output of 2 x 27 watts into 8 ohms or 2 x 31 watts into 4 ohms, total music power 120 watts IHF into 4 ohms. Switch to separate the main amplifier and preamplifier sections. Terminals for 2 pairs of loudspeakers, jack for headphones, center channel output.

    Specification  
    Audio Section  
    Circuitry Single ended push pull
    Music Power Output (IHF) 85 watts total into 8Ω
    120 watts total into 4Ω
    Continuous Power Output
    (both channels driven)
    27W + 27W into 8Ω
    31W + 31W into 4Ω
    Harmonic Distortion < 0.5% (at 1kHz rated output)
    Frequency Response 20Hz — 40kHz ±1dB
    Power Bandwidth 15Hz — 50kHz (AUX,IHF)
    Hum & Noise
    (at rated output)
    MAG: > 85dB
    AUX: > 100dB
    Inputs
    Sensitivity & Impedance
    (for rated output) 1kHz
     
    MAGnetic Phono
    MC Phono
    Tape Monitor
    Auxiliary
    Tuner
    Main In
    3mv/45kΩ
    0.12mv/110Ω
    200mv/220kΩ
    200mv/220kΩ
    200mv/220kΩ
    500mv/70kΩ
    Outputs  
    Terminals and Jacks




     
    Speakers: 4 — 16Ω
    Stereo headphones jack
    Equipped with TAPE MONITOR switch
    Tape recording/playback connector (DIN)
    Pre-amp output (3V/10Ω).
    Center channel output (2V/470Ω)
    Equalization Curves  
     PHONO
     TAPE
    RIAA
    NAB
    Filters
     LOW
     HIGH
     
    50Hz (-8.4dB)
    10KHz (-7.8dB)

    Semiconductors: 2 FETs, 26 Transistors, 5 Diodes

    Versions/Power requirements
    FA, FV  /  110/117/130/220/240V AC 50/60Hz

    Power consumption: 180 watts max.

  • Peso neto
  • 8 kg / 17 lb 9.9 oz (17.621 lb)
  • Procedencia de los datos
  • - - Data from my own collection
  • Mencionado en
  • - - Manufacturers Literature (1970 Pioneer Hi-Fi Stereo Components catalogue)
  • Documentación / Esquemas (1)
  • - - Manufacturers Literature (Installation, Operating and Service manual Pioneer SA-700)
  • Autor
  • Modelo creado por Sándor Selyem-Tóth. Ver en "Modificar Ficha" los participantes posteriores.

 Colecciones | Museos | Literatura

 Forum