Stereo Amplifier A-115

Pioneer Corporation; Tokyo

Datos
Foro
Imágenes
Colecciones

  • Año
  • 1989
  • Categoría
  • Amplificador de audio o mezclador
  • Radiomuseum.org ID
  • 335812

 Especificaciones técnicas

  • Numero de transistores
  • Hay semiconductores.
  • Semiconductores
  • Principio principal
  • Amplificador de Audio
  • Gama de ondas
  • - no hay
  • Especialidades
  • Hi-Fi equipment
  • Tensión de funcionamiento
  • Red: Corriente alterna (CA, Inglés = AC) / 220/240; 240; 110/120-127/220/240 Volt
  • Altavoz
  • - Este modelo usa altavoz exterior (1 o más).
  • Potencia de salida
  • 50 W (undistorted)
  • Material
  • Metálico
  • de Radiomuseum.org
  • Modelo: Stereo Amplifier A-115 - Pioneer Corporation; Tokyo
  • Forma
  • Unidad para estanteria.
  • Ancho, altura, profundidad
  • 420 x 98 x 282 mm / 16.5 x 3.9 x 11.1 inch
  • Anotaciones

  • A hi-fi stereo integrated amplifier housed in a black metal case with continuous power output of 2 x 25 watts into 8 ohms from 30Hz to 20,000Hz with 0.2% total harmonic distortion (30 + 30 watts into 8 ohms, DIN). With Bass and Treble tone controls, Loudness switch, 2-way tape dubbing and a jack for Headphones. RCA phono sockets for input PHONO, TUNER and CD, for input/output DAT/TAPE1 and ADAPTOR/TAPE2 and terminals for 1 pair of loudspeakers. The General Export model also has 3 AC outlets.

    Specification  
    Continuous power output
     (both channels driven at 30Hz—20kHz)
     THD 0.2 %, into 8Ω

    25W + 25W
    DIN Continuous power output
    (both channels driven at 1kHz)
     THD 1.0 %, into 8Ω

    30W + 30W
    Total harmonic distortion
     30Hz—20kHz, 25W, 8Ω
    0.2%
    Input sensitivity/impedance
     PHONO (MM)
     CD, TUNER, DAT/TAPE1, ADPT/TAPE2
    2.5mV/50kΩ
    150mV/50kΩ
    Output level/impedance
     TAPE REC, ADPTOR OUTPUT
    150mV/2.2kΩ
    Frequency response
     PHONO (MM)
     CD, TUNER, DAT/TAPE1, ADPT/TAPE2
    30Hz—20kHz + 0.5dB
    10Hz—50kHz +1dB,-3dB
    Signal-to-Noise ratio
    (IHF short circuit, A network)    		  
     PHONO (MM, 5mV input)
     CD, TUNER, DAT/TAPE1, ADPT/TAPE2    		 77dB
    95dB
    Signal-to-Noise ratio
    (DIN, continuous power/50mW)    		  
     PHONO (MM)
     CD, TUNER, DAT/TAPE1, ADPT/TAPE2    		 63dB/60dB
    81dB/62dB

    Versions/Power requirements

    HEZ Germany 220V, 240V AC 50/60Hz (switchable)
    HE Europe 220V, 240V AC 50/60Hz (switchable)
    HB UK 220V, 240V AC 50/60Hz (switchable)
    YP Australia 240V AC 50/60Hz
    SD General 110V,120V-127V,220V,240V AC 50/60Hz with voltage selector

    Power Consumption:  210 watts

  • Peso neto
  • 4.6 kg / 10 lb 2.1 oz (10.132 lb)
  • Mencionado en
  • - - Manufacturers Literature (1989 Pioneer Hi-Fi Components catalogue)
  • Documentación / Esquemas (1)
  • - - Manufacturers Literature (Service manual Pioneer A-225 A-115 dated Apr 1989)
  • Autor
  • Modelo creado por Howard Craven. Ver en "Modificar Ficha" los participantes posteriores.

 Colecciones | Museos | Literatura

 Forum