Stereo Amplifier A-445

Pioneer Corporation; Tokyo

Données
Forum
Images
Collections

  • Année
  • 1989
  • Catégorie
  • Amplificateur BF ou mélangeur BF
  • Radiomuseum.org ID
  • 321864

 Spécifications techniques

  • No. de transistors
  • Semi-conducteurs présents
  • Semi-conducteurs
  • Principe général
  • Amplification audio
  • Gammes d'ondes
  • - sans
  • Particularités
  • Equipement HIFI
  • Tension / type courant
  • Alimentation Courant Alternatif (CA) / 120; 110; 120-127; 220; 240 Volt
  • Haut-parleur
  • - Ce modèle nécessite des HP externes
  • Puissance de sortie
  • 120 W (160 W max.)
  • Matière
  • Boitier métallique
  • De Radiomuseum.org
  • Modèle: Stereo Amplifier A-445 - Pioneer Corporation; Tokyo
  • Forme
  • Appareil d'étagère
  • Dimensions (LHP)
  • 420 x 126 x 348 mm / 16.5 x 5 x 13.7 inch
  • Remarques

  • A stereo hi-fi integrated amplifier with output power of 60 watts RMS (70 watts DIN) per channel into 8 ohms or 80 watts RMS (100 watts DIN) per channel into 4 ohms, housed in a black or silver metal case (the latter available in West Germany only and is referred to as the A-445-S model in the Service Manual only). Push button switches for Speakers A and B, Subsonic, Loudness, Direct, Muting and Phono Selector (MM/MC), rotary Bass and Treble tone controls, rotary switches for Rec Selector (Tape 2→1, Tape 1→2, Source, Off, CD, Tuner) and Input Selector (Tape2, DAT/Tape1, CD, Phono, Tuner and Line) and a jack for Phones. On the back, RCA phono input sockets for Phono, Line, Tuner and CD, input/output sockets for DAT/Tape1 and Tape2, input/output sockets for connection to an equalizer (after removal of two shorting bars) and terminals for two pairs of Loudspeakers, 

    Specification  
    Continuous power output
    (both channels driven at 20Hz-20kHz)    		 60W + 60W (T.H.D. 0.008%, 8Ω)
    80W + 80W (T.H.D. 0.02%, 4Ω)
    DIN Continuous power output
    (both channels driven at 1kHz)    		 70W + 70W (T.H.D. 1.0%, 8Ω)
    100W + 100W (T.H.D. 1.0%, 4Ω)
    Dynamic power output
    (on EIA dynamic test signal)    		 75W/110W/150W (8Ω/4Ω/2Ω)
    Total harmonic distortion  
      20Hz-20kHz, 60W, 8Ω
      20Hz-20kHz, 80W, 4Ω    		 0.008%
    0.02%
    Input sensitivity/impedance  
      PHONO (MM)
      PHONO (MC)
      CD, TUNER, LINE, TAPE    		 2.5mV/50kΩ
    0.2mV/100Ω
    150mV/40kΩ
    Output level/impedance  
      TAPE REC, ADAPTOR OUT 150mV/2.2kΩ
    Frequency response  
      PHONO (MM)
      PHONO (MC)
      CD, TUNER, LINE, TAPE    		 20Hz-20kHz ±0.3dB
    20Hz-20kHz ±0.5dB
    5Hz-100kHz +0dB,-3dB
    Filter (SUBSONIC) 17Hz (12dB/oct.)
    Signal-to-Noise ratio
    (IHF short circuit, A network)    		  
      PHONO (MM, 5mV input/MC, 0.5mV input)
      CD, TUNER, LINE, TAPE    		 93dB/74dB
    107dB

    Versions/Power requirements

    KCU U.S.A. & Canada model  120V only
    KC Canada model 120V only
    HEZ West Germany model 220V and 240V (Internally switchable)
    HE European Continent model  220V and 240V (Internally switchable)
    HB United Kingdom model 220V and 240V (Internally switchable)
    SD General export model 110V, 120-127V, 220V and 240V (voltage selector)

    Power consumption :  550 watts

    Similar to the Pioneer A-443 Stereo Amplifier.

  • Poids net
  • 8.1 kg / 17 lb 13.5 oz (17.841 lb)
  • Littérature
  • -- Original prospect or advert (1989 Pioneer Hi-Fi Components catalogue)
  • Schémathèque (1)
  • - - Manufacturers Literature (Service manual A-445 A-445-S A-335 A-335-S dated Apr 1989)
  • Schémathèque (2)
  • - - Manufacturers Literature (Operating Instructions A-445 A-335 dated 1989)
  • Auteur
  • Modèle crée par Howard Craven. Voir les propositions de modification pour les contributeurs supplémentaires.

 Collections | Musées | Littérature

 Forum