Stereo Amplifier SA-530 HE / HB / HEZ / S / YP

Pioneer Corporation; Tokyo

Data
Forum
Pictures
Collections

  • Year
  • 1982/1983
  • Category
  • Audio Amplifier or -mixer
  • Radiomuseum.org ID
  • 334313

 Technical Specifications

  • Number of Transistors
  • Semiconductors present.
  • Semiconductors
  • Main principle
  • Audio-Amplification
  • Wave bands
  • - without
  • Details
  • Hi-Fi equipment
  • Power type and voltage
  • Alternating Current supply (AC) / 110; 120; 220; 240 Volt
  • Loudspeaker
  • - This model requires external speaker(s).
  • Power out
  • 76 W (undistorted)
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: Stereo Amplifier SA-530 [HE / HB / HEZ / S / YP] - Pioneer Corporation; Tokyo
  • Shape
  • Book-shelf unit.
  • Dimensions (WHD)
  • 420 x 97 x 275 mm / 16.5 x 3.8 x 10.8 inch
  • Notes

  • A hi-fi stereo integrated amplifier housed in a black metal case, with continuous power output of 2 x 38 watts into 8 ohms 30-20,000Hz. With a Power Meter, rotary controls for Bass, Treble and Balance, rotary switch for Speakers (Off, A, B, A+B), slider Volume control, push button switches for Tuner, Phono, Tape1, Aux/Video, Tape2/Adaptor and Loudness and a jack for Headphones. On the rear panel, RCA phono sockets for input Phono, Tuner and Aux/Video, for input/output Tape1 and Tape2/Adaptor and for output Headphones, terminals for two pairs of loudspeakers (A, B) and 3 AC outlets (except Australia), 2 switched and 1 unswitched.

    Specification  
    Amplifier Section  
    Continuous power output 38 watts per channel into 8Ω
    from 30Hz to 20,000Hz
    with no more than 0.08% THD
    Total Harmonic Distortion
     (30Hz-20,000Hz, 8Ω, from AUX/VIDEO)
     Continuous rated power output    		  
     
    No more than 0.08%
    Intermodulation Distortion
     8Ω, from AUX/VIDEO
     Continuous rated power output    		  
     
    No more than 0.08%
    Damping Factor (1kHz, 8Ω) 30
    Input (Sensitivity/Impedance)
     PHONO
     TUNER, AUX/VIDEO, TAPE 1, 2/ADAPTOR    		  
    2.5mV/50kΩ
    150mV/50kΩ
    Output (Level)
     TAPE REC 1,2/ADAPTOR
     Speaker    		  
    150mV
    A, B, A+B, OFF
    Frequency Response
     PHONO (RIAA Equalization)
     TUNER, AUX/VIDEO, TAPE PLAY 1, 2/ADAPTOR    		  
    20Hz-20,000Hz ±0.5dB
    10Hz-60,000Hz ±2dB
    Hum and Noise (DIN, continuous Power/50mW)
     PHONO
     TUNER AUX/VIDEO, TAPE PLAY 1,2/ADAPTOR    		  
    71dB/62dB
    88dB/62dB

    Versions/Power requirements

    S General Export 110, 120, 220 and 240V AC 50/60Hz (with voltage selector)
    YP Australia 240V AC 50/60Hz only
    HE Europe 220 and 240V AC 50/60Hz (Switchable)
    HB UK 220 and 240V AC 50/60Hz (Switchable)
    HEZ W. Germany 220 and 240V AC 50/60Hz (Switchable)

    Power consumption: 230 watts (YP, HE, HB, HEZ), 90 watts (S)

    See also the similar Pioneer SA-530 Stereo Amplifier KU / KC USA and Canada models.

  • Net weight (2.2 lb = 1 kg)
  • 5.1 kg / 11 lb 3.7 oz (11.233 lb)
  • Mentioned in
  • - - Manufacturers Literature (1983 Pioneer Stereo Components catalogue)
  • Literature/Schematics (1)
  • - - Manufacturers Literature (Service Manual Pioneer SA-530 dated May 1982)
  • Author
  • Model page created by Howard Craven. See "Data change" for further contributors.

 Collections | Museums | Literature

 Forum