Integrated Stereo Amplifier A-119

Pioneer Corporation; Tokyo

Daten
Forum
Bilder
Sammlungen

  • Jahr
  • 1991/1992
  • Kategorie
  • NF-(Niederfrequenz-) Verstärker oder -Mixer
  • Radiomuseum.org ID
  • 218664

 Technische Daten

  • Anzahl Transistoren
  • Halbleiter vorhanden.
  • Hauptprinzip
  • NF-Verstärkung
  • Wellenbereiche
  • - ohne
  • Spezialitäten
  • Hi-Fi-Gerät
  • Betriebsart / Volt
  • Wechselstromspeisung / 220-230/240; 240; 110/120-127/220/240 Volt
  • Lautsprecher
  • - Dieses Modell benötigt externe(n) Lautsprecher.
  • Belastbarkeit / Leistung
  • 50 W (sinus/unverzerrt)
  • Material
  • Metallausführung
  • von Radiomuseum.org
  • Modell: Integrated Stereo Amplifier A-119 - Pioneer Corporation; Tokyo
  • Form
  • Regalgerät wie HiFi-Komponente für Bücherwand.
  • Abmessungen (BHT)
  • 420 x 98 x 282 mm / 16.5 x 3.9 x 11.1 inch
  • Bemerkung

  • A hi-fi stereo integrated amplifier housed in a black metal case with continuous power output of 2 x 25 watts into 8 ohms from 30Hz to 20,000Hz with 0.2% total harmonic distortion (30 + 30 watts into 8 ohms, DIN). With Bass and Treble tone controls, Loudness switch, 2-way tape dubbing and a jack for Headphones. RCA phono sockets for input PHONO, TUNER and CD, for input/output DAT/TAPE and ADAPTOR/TAPE-2 and terminals for 1 pair of loudspeakers. The General Export model has 3 AC outlets.

    2 x 30 Watt Sinusleistung DIN (8 Ohms).

    Same as the earlier Pioneer A-115 Stereo Amplifier apart from appearance.

    Specification  
    Continuous power output
     (both channels driven at 30Hz—20kHz)
     THD 0.2 %, into 8Ω

    25W + 25W
    DIN Continuous power output
    (both channels driven at 1kHz)
     THD 1.0 %, into 8Ω

    30W + 30W
    Total harmonic distortion
     30Hz—20kHz, 25W, 8Ω
    0.2%
    Input sensitivity/impedance
     PHONO (MM)
     CD, TUNER, DAT/TAPE1, ADPT/TAPE2
    2.5mV/50kΩ
    150mV/50kΩ
    Output level/impedance
     TAPE REC, ADPTOR OUTPUT
    150mV/2.2kΩ
    Frequency response
     PHONO (MM)
     CD, TUNER, DAT/TAPE1, ADPT/TAPE2
    30Hz—20kHz + 0.5dB
    10Hz—50kHz +1dB,-3dB
    Signal-to-Noise ratio
    (IHF short circuit, A network)    		  
     PHONO (MM, 5mV input)
     CD, TUNER, DAT/TAPE1, ADPT/TAPE2    		 77dB
    95dB
    Signal-to-Noise ratio
    (DIN, continuous power/50mW)    		  
     PHONO (MM)
     CD, TUNER, DAT/TAPE1, ADPT/TAPE2    		 63dB/60dB
    81dB/62dB

    Versions/Power requirements

    HEWZ Germany 220-230V, 240V AC 50/60Hz (switchable)
    HE Europe 220-230V, 240V AC 50/60Hz (switchable)
    HB UK 220-230V, 240V AC 50/60Hz (switchable)
    YPW Australia 240V AC 50/60Hz
    SD General 110V,120V-127V,220V,240V AC 50/60Hz with voltage selector

    Power Consumption:  210 watts

    UK model Dimensions WHD: 420 x 103 x 282 mm

  • Nettogewicht
  • 4.6 kg / 10 lb 2.1 oz (10.132 lb)
  • Datenherkunft
  • -- Original prospect or advert
  • Literaturnachweis
  • - - Manufacturers Literature (1992 Pioneer Hi-Fi Components catalogue)
  • Literatur/Schema (1)
  • - - Manufacturers Literature (Service manual Pioneer A-119 A-229 dated Mar 1991 refers to A-115)
  • Literatur/Schema (2)
  • - - Manufacturers Literature (Operating Instructions Pioneer A-229 A-119)

 Sammlungen | Museen | Literatur

Sammlungen

Das Modell Integrated Stereo Amplifier befindet sich in den Sammlungen folgender Mitglieder.

 Forum