Stereo Receiver SX-7730
Pioneer Corporation; Tokyo
- Pays
- Japon
- Fabricant / Marque
- Pioneer Corporation; Tokyo
- Année
- 1974–1976
- Catégorie
- Radio - ou tuner d'après la guerre 1939-45
- Radiomuseum.org ID
- 326446
- No. de transistors
- 47
- Semi-conducteurs
- Principe général
- Super hétérodyne (en général)
- Gammes d'ondes
- PO et FM
- Particularités
- Equipement HIFI
- Tension / type courant
- Alimentation Courant Alternatif (CA) / 110; 120; 130; 220; 240 Volt
- Haut-parleur
- - Ce modèle nécessite des HP externes
- Puissance de sortie
- 70 W (80 W max.)
- Matière
- Boitier en bois
- De Radiomuseum.org
- Modèle: Stereo Receiver SX-7730 - Pioneer Corporation; Tokyo
- Forme
- Appareil d'étagère
- Dimensions (LHP)
- 500 x 158 x 410 mm / 19.7 x 6.2 x 16.1 inch
- Remarques
-
A hi-fi stereo receiver with an analogue dial housed in a wooden case, with an AM/FM stereo tuner and an integrated amplifier with power output of 2 x 35 watts RMS into 8 ohms or 2 x 40 watts RMS into 4 ohms. With Signal and Tuning meters, FM Stereo indicator, rotary Tuning, Volume, Balance, Bass and Treble controls, rotary switches for Function (AM, FM, Phono, Mic, Aux) and Rec Selector (FM, Phono, Source, Duplicate), push button switches for Speakers A and B, Low and High Filters, Tape Monitor 1 and 2, Loudness, FM Muting and Mono and jacks for Headphones and Microphone. On the back, an adjustable ferrite bar AM antenna, terminals for AM and FM antennae, RCA phono sockets for input Phono and Aux, for Rec/PB Tape1 and Tape2, DIN socket for Tape Rec/PB, FM De-emphasis switch (25µs, 50µs, 75µs), terminals for 2 pairs of loudspeakers and 2 AC outlets.
Specifications Amplifier Section Continuous Power Output
Both channels driven 20Hz-20kHz35W + 35W into 8Ω
40W + 40W into 4ΩHarmonic Distortion 0.5% Intermodulation Distortion 0.5% Output Speaker
HeadphonesA, B, A + B, 4Ω-16Ω
Low ImpedanceDamping Factor (1kHz, 8Ω) 40 Input Sensitivity/Impedance PHONO, MIC
AUX, TAPE PB 1,2
TAPE PB 2 (DIN connector)2.5mV/50kΩ
150mV/50kΩ
150mV/50kΩOutput Level/Impedance TAPE REC 1, 2
TAPE REC 2 (DIN connector)150mV
30mV/80kΩFrequency Response PHONO (RIAA equalization)
AUX, TAPE PB30Hz-15kHz ±0.3dB
15Hz-40kHz +0.5dB,-1dBHum & Noise (IHF,
short-circuited, A Network)PHONO 70dB, MIC 65dB
AUX, TAPE PB 95dBFM Section Usable Sensitivity (IHF) 1.9µV Capture Ratio (IHF) 1.0dB Selectivity (IHF) 60dB S/N Ratio 70dB Harmonic Distortion MONO 0.2%, STEREO 0.4% Frequency Response 20Hz-15kHz +0.2dB,-2.0dB
50Hz-10kHz +0.2dB,-0.5dBAntenna Input 300Ω Balanced, 75Ω Unbalanced AM Section Sensitivity (IHF, Ferrite antenna) 300µV/m
(IHF, Ext. antenna) 15µVSelectivity 35dB S/N Ratio 50dB Semiconductors
FET 1, ICs 3, Transistors 46, Diodes 22Power requirements
110/120/130/220/240V AC 50/60Hz with voltage selector.Power consumption: 280 W
Similar to the Pioneer SX-737 Stereo Receiver which has a silver fascia.
- Poids net
- 13.2 kg / 29 lb 1.2 oz (29.075 lb)
- Littérature
- -- Original prospect or advert (1974/75 Pioneer Hi-Fi Stereo catalogue)
- Schémathèque (1)
- -- Original prospect or advert (1975/76 Pioneer HiFi Stereo Components)
- Schémathèque (2)
- - - Manufacturers Literature (Owner's manual SX-7730)
- Auteur
- Modèle crée par Howard Craven. Voir les propositions de modification pour les contributeurs supplémentaires.
- D'autres Modèles
-
Vous pourrez trouver sous ce lien 1147 modèles d'appareils, 1131 avec des images et 201 avec des schémas.
Tous les appareils de Pioneer Corporation; Tokyo