AM/FM Stereo Receiver SX-300T SX-300TF

Pioneer Corporation; Tokyo

Data
Forum
Pictures
Collections

  • Year
  • 1969
  • Category
  • Broadcast Receiver - or past WW2 Tuner
  • Radiomuseum.org ID
  • 142627

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Number of Transistors
  • Semiconductors present.
  • Semiconductors
  • Main principle
  • Superheterodyne (common); ZF/IF 455/10700 kHz
  • Wave bands
  • Broadcast (BC) and FM or UHF.
  • Details
  • Hi-Fi equipment
  • Power type and voltage
  • Alternating Current supply (AC) / 110/117/130/220/240 Volt
  • Loudspeaker
  • - This model requires external speaker(s).
  • Power out
  • 24 W (40 W max.)
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: AM/FM Stereo Receiver SX-300T [SX-300TF] - Pioneer Corporation; Tokyo
  • Shape
  • Book-shelf unit.
  • Dimensions (WHD)
  • 405 x 138 x 320 mm / 15.9 x 5.4 x 12.6 inch
  • Notes

  • A solid-state hi-fi stereo receiver housed in a metal case (wooden outer cabinet optional) with a 2 band AM/FM stereo tuner and an integrated amplifier with 2 x 12 watts RMS output power into 8 ohms (2 x 15 watts RMS output power into 4 ohms), total music power 30 watts into 8 ohms (40 watts into 4 ohms).

    Stereo-FM-Receiver mit 2x15 Watt Sinus an 4 Ohm.

    Specification  
    Audio Section  
    Music Power Output 30 watts total into 8Ω (IHF)
    40 watts total into 4Ω
    RMS Rated Power Output 12 watts per channel into 8Ω
    15 watts per channel into 4Ω
    Harmonic Distortion < 1% (at 1kHz rated output)
    Frequency Response 20Hz to 20 kHz ±3dB
    Damping Factor 25 (8Ω)
    Hum & Noise (at rated output) MAG: > 70dB, AUX: > 80dB
    Inputs and Audio Senstivity
    (for rated output)
     MAGnetic PHONO
     CERamic PHONO
     TAPE MONITOR
     AUXiliary    		  
     
    2.2mv
    42mv
    200mv
    160mv
    Output Terminals and Jacks
     
     
     
         		 Speakers: 4Ω - 16Ω
    Stereo headphones jack
    Simultaneous tape recording jacks
     equipped with TAPE MONITOR switch
    Tape recording/playback Jack (DIN standards)
    Equalization Curve PHONO RIAA
    FM Section  
    Frequency Range 87MHz-108MHz
    IHF Usable Sensitivity 3µV
    Image Rejection 55dB (at 98MHz)
    Antenna Input 300Ω (balanced)
    Channel Separation 35dB (at lkHz)
    AM Section  
    Frequency Range 525kHz-1605kHz
    IHF Usable Sensitivity 28µV
    Image Rejection 40dB (at 1000kHz)
    Antenna Input Built-in Ferrite loopstick Antenna

    Semiconductors:  40 Transistors, 26 Diodes

    Versions/Power Requirements
    General Export (F) 110/117/130/220/240V AC 50/60Hz with voltage selector

    Power consumption: 50 Watts Max.

    Same as the Pioneer SX-300T US version apart from voltage options.
    See also the Pioneer LX-300T FM/MW/LW version.

     

  • Net weight (2.2 lb = 1 kg)
  • 8.2 kg / 18 lb 1 oz (18.062 lb)
  • Source of data
  • -- Original prospect or advert
  • Literature/Schematics (1)
  • - - Manufacturers Literature (Operating Instructions Pioneer SX-300T)
  • Author
  • Model page created by Franz Scharner. See "Data change" for further contributors.

 Collections | Museums | Literature

 Forum