Plessey Alnico 9-6H (9-6H00) 27 Ω Voice Coil Impedance
Plessey Rola/Plessey Australia Pty. Limited; Villawood, NSW
- Land
- Australien
- Hersteller / Marke
- Plessey Rola/Plessey Australia Pty. Limited; Villawood, NSW
- Jahr
- 1971
- Kategorie
- Lautsprecher, Kopfhörer oder Ohrhörer
- Radiomuseum.org ID
- 319506
- Wellenbereiche
- - ohne
- Lautsprecher
- Dynamischer (permanent) Ovallautsprecher
- Material
- Diverses Material
- von Radiomuseum.org
- Modell: Plessey Alnico 9-6H [27 Ω Voice Coil Impedance] - Plessey Rola/Plessey Australia
- Bemerkung
-
9" x 6" elliptical loudspeaker.
Power handling capacity 6 watts peak. Diaphragm Fundamental resonance: 90 Hz. Frequency response 85 Hz - 6 kHz. Voice coil impedance 27 ohms. Air gap flux density 0.82 tesla. Total gap flux 200 μ weber. Transformer Type Q or D for equipment deriving power from mains or vibrators. Principle dimensions Overall diameter of diaphragm housing: 9 7/32" x 6 11/32"
Size of baffle opening: 8 ¾" x 5 ⅞"
Diameter of voice coil: ¾"
Depth from pad ring to rear: 3 5/16"Mounting Four slots spaced 4 ⅝" apart on a 4" pitch circle diameter. Dimensions of slots 11/32" x 7/32" Finish Baked enamel diaphragm housing, magnet shell
black lacquered.Weight (without transformer) 1 lb 1½ ozs. Previously branded Rola.
- Literatur/Schema (1)
- - - Manufacturers Literature (Plessey Rola Loudspeaker Data, PR101, August 1972.)
- Autor
- Modellseite von Martin Kent angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.
- Weitere Modelle
-
Hier finden Sie 24 Modelle, davon 17 mit Bildern und 0 mit Schaltbildern.
Alle gelisteten Radios usw. von Plessey Rola/Plessey Australia Pty. Limited; Villawood, NSW