• Anno
  • 1926 ?
  • Categoria
  • Kit, scatola di montaggio (parti sfuse e istruzioni o solo istruzioni di montaggio) 
  • Radiomuseum.org ID
  • 300847

Clicca sulla miniatura dello schema per richiederlo come documento gratuito.

 Specifiche tecniche

  • Numero di tubi
  • 5
  • Principio generale
  • A circuiti accordati (amplif. diretta) senza reazione; 2 Stadi BF
  • N. di circuiti accordati
  • 3 Circuiti Mod. Amp. (AM)
  • Gamme d'onda
  • Solo onde medie (OM).
  • Tensioni di funzionamento
  • Batterie (di accumulatori e/o a secco) / 6 & 45 & 90 Volt
  • Altoparlante
  • - Questo apparecchio richiede altoparlante/i esterno/i.
  • Materiali
  • Bachelite, valvole visibili
  • Radiomuseum.org
  • Modello: Ensemble Kit - Premier Electric Co.; Chicago
  • Forma
  • Chassis o in scatola da montaggio
  • Dimensioni (LxAxP)
  • 21 x 7 x 6.25 inch / 533 x 178 x 159 mm
  • Annotazioni
  • The RF coils for this kit are not typical for a radio of this era.  They are potted in a Bakelite tube that is 38.5 mm diameter by 35 mm long.

    The schematic diagram is based on examination of two radios both of which had the audio transformers replaced.  Both kits had the bias for the RF stages connected to the filament rheostat for the detector stage so that is believed to be consistent with the kit instructions.  The radio is easier to operate if the RF bias is connected to the ground bus and not dependent on the detector filament voltage.

    From examination of the two examples, wiring of the kits was done with 22AWG bare wire covered with lengths of colored rubber tubing.  Each net in the radio was made with a continuous length of wire laced through the connection points with pieces of tubing covering the wire between connections.

  • Autore
  • Modello inviato da Jay Kinnard. Utilizzare "Proponi modifica" per inviare ulteriori dati.

 Collezioni | Musei | Letteratura

Collezioni

Il modello Ensemble Kit fa parte delle collezioni dei seguenti membri.

 Forum