Pedigree 501P Ch= T21-1A
Pye Industries Ltd Australia; Marrickville
- Pays
- Australie
- Fabricant / Marque
- Pye Industries Ltd Australia; Marrickville
- Année
- 1962
- Catégorie
- Récepteur de télévision ou moniteur
- Radiomuseum.org ID
- 285505
- No. de tubes
- 15
- No. de transistors
- Principe général
- Super hétérodyne avec étage HF; FI/IF 36000/30500 kHz; 1 Etage(s) BF
- Gammes d'ondes
- VHF/UHF (voir details en note)
- Tension / type courant
- Alimentation Courant Alternatif (CA) / 200; 230; 240 Volt
- Haut-parleur
- HP dynamique à aimant permanent + bobine mobile / Ø 4 inch = 10.2 cm
- Matière
- Cuir / canvas / plastique mais autre matériel en dessous!
- De Radiomuseum.org
- Modèle: Pedigree 501P Ch= T21-1A - Pye Industries Ltd Australia;
- Forme
- Modèle de table générique
- Dimensions (LHP)
- 23 x 23 x 16.875 inch / 584 x 584 x 429 mm
- Remarques
-
This 23" B&W television tuned the 13 standard Australian VHF channels.
This was one of a very successful line of Pye Pedigree sets made around 1962 to the early 1970s, using all valve, hybrid and finally solid state chassis. It used a vinyl covered metal case, following closely the curve of the CRT.
The price below included a metal stand.
As well as the diodes listed, there is a dual selenium diode type D3-2-1Y used in the horizontal phase discriminator. The CRT type used is not stated in the service information.
- Prix de mise sur le marché
- 177.45 Aus£
- Littérature
- Mingay's Price Service, Feb, 1964
- Schémathèque (1)
- - - Manufacturers Literature (Pye Service Data.)
- Schémathèque (2)
- J.R. Publications Television Service Handbook (L.J. Series Vol. 1, 1962 & Vol. 2, 1967, Page P76.)
- Auteur
- Modèle crée par Stuart Irwin. Voir les propositions de modification pour les contributeurs supplémentaires.
- D'autres Modèles
-
Vous pourrez trouver sous ce lien 202 modèles d'appareils, 164 avec des images et 19 avec des schémas.
Tous les appareils de Pye Industries Ltd Australia; Marrickville