Multi-Mode QRSS/WSPR Transmitter kit Ultimate3S U3S
QRP Labs; Sussex
- Produttore / Marca
- QRP Labs; Sussex
- Anno
- 2015
- Categoria
- Trasmettitore amatoriale
- Radiomuseum.org ID
- 324652
- Principio generale
- Trasmettitore
- Gamme d'onda
- Gamme d'onda nelle note.
- Tensioni di funzionamento
- Alimentazione a corrente continua (CC) / 5 Volt
- Altoparlante
- - - Nessuna uscita audio.
- Materiali
- Mobile di metallo
- Radiomuseum.org
- Modello: Multi-Mode QRSS/WSPR Transmitter kit Ultimate3S U3S - QRP Labs; Sussex
- Forma
- Soprammobile compatto/con bordi arrotondati/midget senza pulsantiera/tastiera.<= 35 cm (Sometimes with handle but for mains only).
- Dimensioni (LxAxP)
- 120 x 45 x 180 mm / 4.7 x 1.8 x 7.1 inch
- Annotazioni
-
An Amateur Band transmitter supplied as a kit with an optional aluminium case. It can produce QRSS, Hell, WSPR, Opera and PI4 slow-signal modes anywhere from 2200m to 2m and even 222MHz bands. Plug-in LPF filters are available for all 16 HF/MF/LF/VHF bands from 2200m to 222MHz. Measured Output Power about 70 mW into 50 ohms (it is possible to increase Output Power to about 200 mW by adding 2 BS170 transistors (supplied) to the final stage. An optional external GPS receiver module kit (eg: QLG1) sets the time, maintains precise timekeeping, sets location, calibrates the output frequency and corrects temperature-induced frequency drift With 9-pin D connector, power socket and matching plug, BNC connector.
Launched January 2015.
- Peso netto
- 0.5 kg / 1 lb 1.6 oz (1.101 lb)
- Bibliografia
- -- Original-techn. papers. (QRP Labs Ultimate3S specification)
- Autore
- Modello inviato da Emilio Focosi. Utilizzare "Proponi modifica" per inviare ulteriori dati.
- Altri modelli
-
In questo link sono elencati 1 modelli, di cui con immagini e con schemi.
Elenco delle radio e altri apparecchi della QRP Labs; Sussex
Collezioni
Il modello Multi-Mode QRSS/WSPR Transmitter kit fa parte delle collezioni dei seguenti membri.