SSB Adaptor RA-63
Racal Engineering / Instruments / Electronics Ltd., Bracknell
- País
- Gran Bretaña (GB)
- Fabricante / Marca
- Racal Engineering / Instruments / Electronics Ltd., Bracknell
- Año
- 1960 ??
- Categoría
- Conversor o Adaptador de frecuencia
- Radiomuseum.org ID
- 106380
Haga clic en la miniatura esquemática para solicitarlo como documento gratuito.
- Numero de valvulas
- 6
- Principio principal
- ZF/IF 100/18 kHz
- Gama de ondas
- - no hay
- Tensión de funcionamiento
- Red: Corriente alterna (CA, Inglés = AC) / 100-125 / 200-250 Volt
- Altavoz
- Altavoz dinámico (de imán permanente) / Ø 2.5 inch = 6.4 cm
- Potencia de salida
- 0.05 W (unknown quality)
- Material
- Metálico
- de Radiomuseum.org
- Modelo: SSB Adaptor RA-63 - Racal Engineering /
- Forma
- Rack
- Ancho, altura, profundidad
- 483 x 90 x 325 mm / 19 x 3.5 x 12.8 inch
- Anotaciones
- SSB Adaptor matching RA-17 family receivers, improving the reception of USB / LSB / ISB signals by means of a product detector.
The 3rd IF of 100 kHz is mixed with a 82 kHz oscillator signal to result in a new IF of 18 kHz, mixing with a stable 18 kHz oscillator signal allows to extract the sideband audio.
Variants: RA-63G for British market with European tubes, RA-63H for US market with American tubes and RA-63D with crstal controlled 82 kHz oscillator instead of LC oscillator.
- Peso neto
- 7.5 kg / 16 lb 8.3 oz (16.52 lb)
- Mencionado en
- Racal Handbook, Rinus Jansen
- Autor
- Modelo creado por Martin Bösch. Ver en "Modificar Ficha" los participantes posteriores.
- Otros modelos
-
Donde encontrará 113 modelos, 62 con imágenes y 18 con esquemas.
Ir al listado general de Racal Engineering / Instruments / Electronics Ltd., Bracknell
Colecciones
El modelo SSB Adaptor es parte de las colecciones de los siguientes miembros.
Contribuciones en el Foro acerca de este modelo: Racal Engineering /: SSB Adaptor RA-63
Hilos: 1 | Mensajes: 1
Variants of the RA-63 SSB Adaptor:
RA-63A: for use with receivers with 100 kHz IF out
RA-63B: for use with receivers with 100 kHz IF out, US type plugs and sockets
RA-63C: for use with receivers with 465 kHz IF out
RA-63D: for use with receivers with 100 kHz IF out, improved stability through
crystal controlled 82 kHz oscillator
RA-63E: for use with receivers with 455 kHz IF out
RA-63G: identical to RA-63A, improved stability through reinforced side panels
RA-63H: identical to RA-63B (US plugs / sockets), improved stability through reinforced side panels
RA-63K: identical to RA-63D, improved stability through reinforced side panels
RA-63L: identical to RA-63E (455 kHz IF), improved stability through reinforced side panels
RA-63M: identical to RA-63C (465 kHz IF), improved stability through reinforced side panels
RA-63A: for use with receivers with 100 kHz IF out
RA-63B: for use with receivers with 100 kHz IF out, US type plugs and sockets
RA-63C: for use with receivers with 465 kHz IF out
RA-63D: for use with receivers with 100 kHz IF out, improved stability through
crystal controlled 82 kHz oscillator
RA-63E: for use with receivers with 455 kHz IF out
RA-63G: identical to RA-63A, improved stability through reinforced side panels
RA-63H: identical to RA-63B (US plugs / sockets), improved stability through reinforced side panels
RA-63K: identical to RA-63D, improved stability through reinforced side panels
RA-63L: identical to RA-63E (455 kHz IF), improved stability through reinforced side panels
RA-63M: identical to RA-63C (465 kHz IF), improved stability through reinforced side panels
Martin Bösch, 01.Oct.06