- País
- Estados Unidos
- Fabricante / Marca
- Radio Mfg. Engineers, Inc. (RME); Peoria, IL
- Año
- 1934/1935
- Categoría
- Receptor para radioaficionados (puede incluir bandas de radiodifusión publ.)
- Radiomuseum.org ID
- 52543
Haga clic en la miniatura esquemática para solicitarlo como documento gratuito.
- Numero de valvulas
- 9
- Principio principal
- Superheterodino con paso previo de RF; ZF/IF 465 kHz
- Gama de ondas
- OM y más de dos OC
- Tensión de funcionamiento
- Red: Corriente alterna (CA, Inglés = AC) / 115 Volt
- Altavoz
- - Este modelo usa amplificador externo de B.F.
- Material
- Metálico
- de Radiomuseum.org
- Modelo: RME-9D - Radio Mfg. Engineers, Inc. RME
- Forma
- Sobremesa de cualquier forma, detalles no conocidos.
- Ancho, altura, profundidad
- 19 x 9 x 10.5 inch / 483 x 229 x 267 mm
- Anotaciones
-
Coverage 540 kHz - 22 MHz, AM, CW (BFO).
Twin "airplane" main and bandspread dial with "R"-meter between them, antenna trimmer.
Variant: RME-9D Spacial, extended coverage 1.45 - 32 MHz.First commercially produced communications receiver to offer a calibrated dial with bandswitching, bandspread, RF amplifier, R-meter, crystal filter and AVC in one package.
Completely hand built from start to finish by a single assembler belonging to a team of several assemblers. An assembler would draw a complete set of parts and would be responsible for the mechanical assembly and the complete electrical assembly. Because competition was fierce for recognition on who was the best, each assembler would proudly sign his name under the chassis of each successful receiver as it passed inspection and final adjustments.
Total number of RME-9D receivers built is probably around 500
- Procedencia de los datos
- Communications Receivers
- Referencia esquema
- Rider's Perpetual, Volume 15 = 1947 and before
- Autor
- Modelo creado por Peter Rutishauser. Ver en "Modificar Ficha" los participantes posteriores.
- Otros modelos
-
Donde encontrará 50 modelos, 26 con imágenes y 33 con esquemas.
Ir al listado general de Radio Mfg. Engineers, Inc. (RME); Peoria, IL