Rapar Solid State AM Stereo Amplifier KS-400R
Rapar, Radio Parts Pty. Ltd.; Melbourne
- Pays
- Australie
- Fabricant / Marque
- Rapar, Radio Parts Pty. Ltd.; Melbourne
- Année
- 1970 ??
- Catégorie
- Radio - ou tuner d'après la guerre 1939-45
- Radiomuseum.org ID
- 314572
- No. de transistors
- 21
- Semi-conducteurs
- Principe général
- Super hétérodyne (en général)
- Gammes d'ondes
- PO uniquement
- Tension / type courant
- 230 Volt
- Haut-parleur
- - Ce modèle nécessite des HP externes
- Matière
- Boitier métallique
- De Radiomuseum.org
- Modèle: Rapar Solid State AM Stereo Amplifier KS-400R - Rapar, Radio Parts Pty. Ltd.;
- Forme
- Appareil d'étagère
- Dimensions (LHP)
- 15.75 x 13.5 x 5.5 inch / 400 x 343 x 140 mm
- Remarques
-
The RAPAR KS-400R AM TUNER AMPLIFIER features high sensitivity, freedom from drift and above all, the circuit of exceptional quality and design for the upmost in frequency response with a minimum of distortion, hum and noise. It incorporates a lot more features for refinement which combine to satisfy the most particular music lover. No other brand brings you such attractive features at such an attractive price.
See and hear for yourself difference.
AMPLIFIER SECTION
- Uses an ITL/OTL circuit which reproduces rich distortortion free sound.
- Operates instantly and consumes little current.
- Assures complete freedom from temperature-rise trouble.
- Loudness Control by a switch and Tape Moniter also by a switch.
- Outlets: 4, 8, 16 ohm impedance.
- Uses 1A for protection of output transistors.
- PHONO input permits use of Magnetic Cartridge.
- Tape Recorder output and AC Convenience Outlet on rear panel.
SPECIFICATION
Model KS-400R Solid State AM Tuner Amplifier
Audio Section
Music Power 40 Watts RMS Power 30 Watts Frequency Response 20 - 20,000 Hz (±2dB at 1W) Input Sensitivity - Phono (Mag) 2mV (±2dB)
- AUX. 250mV (±2dB)
Tone Control - 50 Hz ± 12 dB - 13 dB
- 10,000 Hz ± 10 dB - 11 dB
Loudness Control - 50 Hz ± 10 dB
- 10,000 Hz ± 3 dB
Hum & Noise - Phono (Mag) 55 dB
- AUX. 65 dB
Power Source 230V AC. 50 Hz Power Consumption 60 Watts Compliment - 21 Transistors
- 9 Diodes
AM Section
Tuning Range 535-1605 kHz Antenna Bar Antenna Sensitivity (IHF) 20 V Image ratio 40 dB S/N ratio 40 dB Output 1V (Mod. 30% Assures high sensitivity reception with 3 stage of IF Amplification.
- Poids net
- 23 lb 0 oz (23 lb) / 10.442 kg
- Littérature
- -- Original prospect or advert (Radio Parts Catalogue.)
- Auteur
- Modèle crée par Martin Kent. Voir les propositions de modification pour les contributeurs supplémentaires.
- D'autres Modèles
-
Vous pourrez trouver sous ce lien 30 modèles d'appareils, 27 avec des images et 1 avec des schémas.
Tous les appareils de Rapar, Radio Parts Pty. Ltd.; Melbourne