Rapar Solid State Public Address Amplifier. TPA-30

Rapar, Radio Parts Pty. Ltd.; Melbourne

Data
Forum
Pictures
Collections

  • Year
  • 1970 ?
  • Category
  • Audio Amplifier or -mixer
  • Radiomuseum.org ID
  • 310952

 Technical Specifications

  • Number of Transistors
  • 5
  • Main principle
  • Audio-Amplification
  • Wave bands
  • - without
  • Power type and voltage
  • Line / Storage batteries (perhaps also batteries) / 12 Volt DC / 240 Volt AC Volt
  • Loudspeaker
  • - This model requires external speaker(s).
  • Power out
  • 20 W (undistorted)
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: Rapar Solid State Public Address Amplifier. TPA-30 - Rapar, Radio Parts Pty. Ltd.;
  • Shape
  • Book-shelf unit.
  • Dimensions (WHD)
  • 240 x 100 x 190 mm / 9.4 x 3.9 x 7.5 inch
  • Notes

  • RAPAR MODEL TPA30 SOLID STATE PUBLIC ADDRESS AMPLIFIER

    WITH MOUNTING BRACKET FITTED

    OUTPUT POWER
    • 30 Watts Music power
    • 20 Watts RMS at 8Ω
    FREQUENCY RESPONSE 50 - 18,000 cps
    INPUTS & SENSITIVITY
    • Mic-1 2mV at 600Ω
    • Mic-2 2mV at 50,000Ω
    • AUX. 200mV
    • Music, 200mV
    S/N RATIO Better than 50 db
    OUTPUT IMPEDANCE
    • 4, 8, 16Ω
    • 20 and 70 Volt Line outputs
    CONTROLS
    • Mic-1 Volume Control
    • Mic-2 Volume Control
    • AUX & Music Volume Control
    • Tone Control

    See the Full Specifications in the attached PDF Document.

  • Net weight (2.2 lb = 1 kg)
  • 10 lb 0 oz (10 lb) / 4.540 kg
  • Mentioned in
  • -- Original prospect or advert (Radio Parts Group Catalogue 1970-1972, Page 31)
  • Author
  • Model page created by Bruce Wilkie. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model Rapar Solid State Public Address Amplifier. is part of the collections of the following members.

 Forum