Master Stereo Amplifier

Rogers, Catford (see also Rogers Birmingham)

Dati
Forum
Immagini
Collezioni

  • Anno
  • 1965 ?
  • Categoria
  • Amplificatore audio o mixer audio
  • Radiomuseum.org ID
  • 356840

Clicca sulla miniatura dello schema per richiederlo come documento gratuito.

 Specifiche tecniche

  • Numero di tubi
  • 10
  • Principio generale
  • Amplificatore audio
  • Gamme d'onda
  • - senza
  • Particolarità
  • Hi-Fi equipment
  • Tensioni di funzionamento
  • Alimentazione a corrente alternata (CA)
  • Altoparlante
  • - Questo apparecchio richiede altoparlante/i esterno/i.
  • Potenza d'uscita
  • 50 W (qualità ignota)
  • Materiali
  • Mobile di metallo
  • Radiomuseum.org
  • Modello: Master Stereo Amplifier - Rogers, Catford see also
  • Forma
  • Chassis o in scatola da montaggio
  • Annotazioni

  • Rogers Master Power Amplifier

    The Rogers Master power amplifier was reviewed by Gramophone in December 1965, alongside the Radford STA25. Both reviews were later reprinted in "Gramophone Technical Reports – 2."

    Notably, the Rogers Master was advertised in conjunction with the Master Stereo Control Unit, highlighting its role in a complete audio system.

    Comparison with Radford STA25

    Both amplifiers were based on the EL34 valve and had similar pricing:

    • Rogers Master: £50
    • Radford STA25: £52.5

    The Radford amplifier became more widely known, partly due to its Bailey pentode-triode phase splitter.

    Circuit Description

    According to the Gramophone review, the Rogers Master circuit featured:

    1. First stage: EF86 resistance-coupled with anode-to-grid feedback
    2. Second stage: AC-coupled EF86 with cathode circuit feedback
    3. Third stage: Directly coupled ECC82 twin-triode with strapped triodes
    4. Output stage: AC-coupled pair of EL34 valves in ultra-linear push-pull mode

    The amplifier utilised silicon rectifiers and high-capacity electrolytic capacitors, resulting in a low-impedance HT supply for improved power output without distortion.

    Technical Specifications

    • Input sensitivity: 750 mV (for 25W output)
    • Power output: Approximately 25W per channel (exact figure unspecified)

    Historical Context

    The Master amplifier represented a departure from Rogers' earlier designs, such as the Senior Mk II, which used a double cascode phase splitter. The Master employed a simpler phase-splitter following a voltage amplifier stage, with an unusual preamplifier stage outside the main feedback loop. This design choice contributed to its unique performance characteristics within the context of tube amplifiers of that era.

  • Bibliografia
  • - - Manufacturers Literature
  • Letteratura / Schemi (1)
  • -- Original prospect or advert (Gramophone December 1965.)
  • Autore
  • Modello inviato da Gary Cowans. Utilizzare "Proponi modifica" per inviare ulteriori dati.

 Collezioni | Musei | Letteratura

 Forum