Netzgerät für konstante Wechselspannung HS86
Rohde & Schwarz, PTE; München
- Paese
- Germania
- Produttore / Marca
- Rohde & Schwarz, PTE; München
- Anno
- 1953 ??
- Categoria
- Strumento da laboratorio
- Radiomuseum.org ID
- 353307
-
- alternative name: Messgerätebau Memmingen || Physikalisch-Technisches Entwicklungslabor Dr. Rohde & Dr. Schwarz
- Numero di tubi
- 2
- Numero di transistor
- Semiconduttori
- 2xE400C85S
- Gamme d'onda
- - senza
- Tensioni di funzionamento
- Alimentazione a corrente alternata (CA) / 190-230 Volt
- Altoparlante
- - - Nessuna uscita audio.
- Materiali
- Mobile di metallo
- Radiomuseum.org
- Modello: Netzgerät für konstante Wechselspannung HS86 - Rohde & Schwarz, PTE; München
- Forma
- Soprammobile basso, con andamento orizzontale (grosse dimensioni).
- Dimensioni (LxAxP)
- 560 x 200 x 378 mm / 22 x 7.9 x 14.9 inch
- Annotazioni
-
Das Rohde & Schwarz Netzgerät für konstante Wechselspannung HS86 regelt Spannungssprünge zwischen 190 und 230 Volt oder Belastungsänderungen zwischen 0 und 500 VA innerhalb 0,2 Sekunden aus. Die Regelung setzt bei einer Spannungsänderung von ±0,05% ein.
Eigenschaften:
Eingangsspannung: 40...60 Hz, 190...230 V
Ausgangsspannung: 220 V, Fehlergrenzen 0,2%
Durchgangsleistung: max. 500 VA
Regelgeschwindigkeit für 10% Spannungsänderung: <0,1 s
Klirrfaktor (bei 3% Netzklirrfaktor): <5%
Netzaufnahme bei Vollast: 755 VAAbmessungen gelten für das Kastengerät.
Nur Einschub: 520 x 168 x 247 mmSehr ähnlich dem Rohde & Schwarz NWK.
- Peso netto
- 31 kg / 68 lb 4.5 oz (68.282 lb)
- Autore
- Modello inviato da Gottfried Silberhorn. Utilizzare "Proponi modifica" per inviare ulteriori dati.
- Altri modelli
-
In questo link sono elencati 550 modelli, di cui 506 con immagini e 252 con schemi.
Elenco delle radio e altri apparecchi della Rohde & Schwarz, PTE; München
Discussioni nel forum su questo modello: Rohde & Schwarz, PTE: Netzgerät für konstante Wechselspannung HS86
Argomenti: 1 | Articoli: 7
Dear Seniors, Editors and fellow Radiophiles,
I am posting pictures of this rare Rohde & Schwarz HS86 mains AC voltage stabilizer, please feel free to use in RadioMuseum liberally.
The only specifications I know: input 190-230VAC, output 220VAC +/-0.2%, 500VA max, tubes--one EL34, one diode D1,8/1,2
Soundwise: very stable rock-solid soundstage, extremely dark background, without slightest dynamic compression.
The steel cage must be removed during operation, otherwise it vibrates (induced by the transformers) with a loud audible hum.
Prost!
Allan
Allegati
- Front panel (293 KB)
- Output switch and socket (252 KB)
- Input switch (284 KB)
- Power meter (206 KB)
- Choke with 3 coil compartments (291 KB)
- Overload relay (241 KB)
- Tubes (291 KB)
- Inside overview (262 KB)
- Back (247 KB)
- Inside overview 2 (249 KB)
- Inside overview 3 (260 KB)
- Inside overview 4 (287 KB)
- Steel cage handel (222 KB)
Allan So, 12.May.12