Fluxmaster Series 5C 15 Ω Voice Coil Impedance
Rola Company (AUS) Pty. Ltd.; Melbourne
- País
- Australia
- Fabricante / Marca
- Rola Company (AUS) Pty. Ltd.; Melbourne
- Año
- 1961–1963
- Categoría
- Altavoz, cascos o auricular
- Radiomuseum.org ID
- 315917
- Gama de ondas
- - no hay
- Altavoz
- Altavoz dinámico (de imán permanente) / Ø 5 inch = 12.7 cm
- Material
- Materiales diversos
- de Radiomuseum.org
- Modelo: Fluxmaster Series 5C [15 Ω Voice Coil Impedance] - Rola Company AUS Pty. Ltd.;
- Anotaciones
-
5" loudspeaker with F51 cone.
Power handling capacity 2½ watts (4½ Watts Peak). Diaphragm Fundamental resonance: 135 c.p.s. (Hz) Frequency response 130 c.p.s. (hz) - 7 K.C. (kHz) Voice coil impedance 15 ohms at 400 c.p.s. (Hz) Air gap flux density 7,700 Gauss Total gap flux 14,500 lines Transformer Type E or G for equipment deriving power from mains
or vibrators.
Type G for equipment deriving power from dry
batteriesPrinciple dimensions Overall diameter of diaphragm housing: 5"
Size of baffle opening: 4 1/16"
Diameter of voice coil: ¾"
Depth from pad ring to rear: 2"Mounting Four holes 13/64" diameter spaced 90º apart on a
4 11/16" pitch circle diameter.Finish Baked enamel diaphragm housing, magnet shell
black lacquered.Weight (without transformer) 5½ ozs. Superseded by Type 5CQ.
- Documentación / Esquemas (1)
- - - Manufacturers Literature (Rola Loudspeaker Data Technical Bulletin, No. 22, 1/5/1962.)
- Autor
- Modelo creado por Martin Kent. Ver en "Modificar Ficha" los participantes posteriores.
- Otros modelos
-
Donde encontrará 195 modelos, 70 con imágenes y 1 con esquemas.
Ir al listado general de Rola Company (AUS) Pty. Ltd.; Melbourne