Fluxmaster Series 6H 3½ Ω Voice Coil Impedance & With F81 cone.
Rola Company (AUS) Pty. Ltd.; Melbourne
- País
- Australia
- Fabricante / Marca
- Rola Company (AUS) Pty. Ltd.; Melbourne
- Año
- 1952–1971
- Categoría
- Altavoz, cascos o auricular
- Radiomuseum.org ID
- 313947
- Altavoz
- Altavoz dinámico (de imán permanente) / Ø 6 inch = 15.2 cm
- Material
- Materiales diversos
- de Radiomuseum.org
- Modelo: Fluxmaster Series 6H [3½ Ω Voice Coil Impedance & With F81 cone.] - Rola Company AUS Pty. Ltd.;
- Anotaciones
-
6" loudspeaker with F81 cone.
Power handling capacity 4 watts (6 watts peak). Diaphragm Fundamental resonance: 115 c.p.s. (Hz) Frequency response 110 c.p.s. (Hz) - 7 K.C. (kHz) Voice coil impedance 3.5 ohms at 400 c.p.s. (Hz) Air gap flux density 7,250 Gauss (Gs) Total gap flux 16,200 lines Transformer Type Q or D for equipment deriving power from mains or vibrators. Principle dimensions Overall diameter of diaphragm housing: 6 9/16"
Size of baffle opening: 5½"
Diameter of voice coil: ¾"
Depth from pad ring to rear: 2¼"Mounting Four slots spaced 90º apart on a 6 3/16 pitch circle diameter. Dimensions of slots 9/32" x 13/64" Finish Baked enamel diaphragm housing, magnet shell
black lacquered.Weight (without transformer) 13 ozs. Trade price without transformer £1/8/9. Trade price with Type D transformer, £1/12/4.
Retail price without transformer £2/3/2. Retail price with Type D transformer, £2/8/7.
Rebranded Plessey Type 6H after 1971.
- Mencionado en
- Mingay's Price Service (May 1953 to Aug 1971)
- Documentación / Esquemas (1)
- - - Manufacturers Literature (Rola Loudspeaker Data. (Date unknown))
- Autor
- Modelo creado por Martin Kent. Ver en "Modificar Ficha" los participantes posteriores.
- Otros modelos
-
Donde encontrará 194 modelos, 70 con imágenes y 1 con esquemas.
Ir al listado general de Rola Company (AUS) Pty. Ltd.; Melbourne