Fluxmaster Series 8H With F74 cone
Rola Company (AUS) Pty. Ltd.; Melbourne
- Paese
- Australia
- Produttore / Marca
- Rola Company (AUS) Pty. Ltd.; Melbourne
- Anno
- 1952–1971
- Categoria
- Altoparlante, cuffia o auricolare
- Radiomuseum.org ID
- 316005
- Gamme d'onda
- - senza
- Altoparlante
- AP magnetodinamico (magnete permanente e bobina mobile) / Ø 8 inch = 20.3 cm
- Materiali
- Vari materiali
- Radiomuseum.org
- Modello: Fluxmaster Series 8H [With F74 cone] - Rola Company AUS Pty. Ltd.;
- Annotazioni
-
8" loudspeaker with F74 cone.
Power handling capacity 4 watts (6 watts peak). Diaphragm Fundamental resonance: 110 c.p.s. (Hz) Frequency response 110 c.p.s. (Hz) - 7 K.C. (kHz) Voice coil impedance 3 ohms at 400 c.p.s. (Hz) Air gap flux density 9,200 Gauss (Gs) Total gap flux 22,800 lines Transformer Type Q or D for equipment deriving power from mains or vibrators. Principle dimensions Overall diameter of diaphragm housing: 8 1/16"
Size of baffle opening: 7 1/16"
Diameter of voice coil: ¾"
Depth from pad ring to rear: 3 1/16"Mounting Four slots spaced 90º apart on a 7 19/32" pitch circle diameter. Dimensions of slots 5/16" x 7/32" Finish Baked enamel diaphragm housing, magnet shell
black lacquered.Weight (without transformer) 1 lb ¼ ozs. Rebranded Plessey Type 8H after 1971.
- Letteratura / Schemi (1)
- - - Manufacturers Literature (Rola Technical Bulletin, No. 11, April 1952.)
- Autore
- Modello inviato da Martin Kent. Utilizzare "Proponi modifica" per inviare ulteriori dati.
- Altri modelli
-
In questo link sono elencati 194 modelli, di cui 70 con immagini e 1 con schemi.
Elenco delle radio e altri apparecchi della Rola Company (AUS) Pty. Ltd.; Melbourne