Fluxmaster Series 8H With F76 cone
Rola Company (AUS) Pty. Ltd.; Melbourne
- País
- Australia
- Fabricante / Marca
- Rola Company (AUS) Pty. Ltd.; Melbourne
- Año
- 1952–1957
- Categoría
- Altavoz, cascos o auricular
- Radiomuseum.org ID
- 316006
- Gama de ondas
- - no hay
- Altavoz
- Altavoz dinámico (de imán permanente) / Ø 8 inch = 20.3 cm
- Material
- Materiales diversos
- de Radiomuseum.org
- Modelo: Fluxmaster Series 8H [With F76 cone] - Rola Company AUS Pty. Ltd.;
- Anotaciones
-
8" loudspeaker with F76 cone.
Power handling capacity 4 watts (6 watts peak). Diaphragm Fundamental resonance: 75 c.p.s. (Hz) Frequency response 80 c.p.s. (Hz) - 5 K.C. (kHz) Voice coil impedance 3 ohms at 400 c.p.s. (Hz) Air gap flux density 9,200 Gauss (Gs) Total gap flux 22,800 lines Transformer Type Q or D for equipment deriving power from mains or vibrators. Principle dimensions Overall diameter of diaphragm housing: 8 1/16"
Size of baffle opening: 7 1/16"
Diameter of voice coil: ¾"
Depth from pad ring to rear: 3 1/16"Mounting Four slots spaced 90º apart on a 7 19/32" pitch circle diameter. Dimensions of slots 5/16" x 7/32" Finish Baked enamel diaphragm housing, magnet shell
black lacquered.Weight (without transformer) 1 lb ¼ ozs.
- Documentación / Esquemas (1)
- - - Manufacturers Literature (Rola Technical Bulletin, No. 11, April 1952.)
- Autor
- Modelo creado por Martin Kent. Ver en "Modificar Ficha" los participantes posteriores.
- Otros modelos
-
Donde encontrará 194 modelos, 70 con imágenes y 1 con esquemas.
Ir al listado general de Rola Company (AUS) Pty. Ltd.; Melbourne