Fluxmaster Series 8K With F62 cone

Rola Company (AUS) Pty. Ltd.; Melbourne

Datos
Foro
Imágenes
Colecciones

  • Año
  • 1952/1953
  • Categoría
  • Altavoz, cascos o auricular
  • Radiomuseum.org ID
  • 316316

 Especificaciones técnicas

  • Gama de ondas
  • - no hay
  • Altavoz
  • Altavoz dinámico (de imán permanente) / Ø 8 inch = 20.3 cm
  • Material
  • Materiales diversos
  • de Radiomuseum.org
  • Modelo: Fluxmaster Series 8K [With F62 cone] - Rola Company AUS Pty. Ltd.;
  • Anotaciones

  • 8" loudspeaker with F62 cone.

    Power handling capacity 5½ watts (8 watts peak).
    Diaphragm Fundamental resonance: 70 c.p.s. (Hz)
    Frequency response 85 c.p.s. (Hz) - 6 K.C. (kHz)
    Voice coil impedance 2 ohms at 400 c.p.s. (Hz)
    Air gap flux density 7,000 Gauss (Gs)
    Total gap flux 27,000 lines
    Transformer Type K or C for equipment deriving power from mains or vibrators.
    Principle dimensions Overall diameter of diaphragm housing: 8 1/16"
    Size of baffle opening: 7"
    Diameter of voice coil: 1"
    Depth from pad ring to rear: 3¼"
    Mounting Four slots spaced 90º apart on a 7 19/32" pitch circle diameter. Dimensions of slots 5/16" x 7/32"
    Finish Baked enamel diaphragm housing, magnet shell
    black lacquered.
    Weight (without transformer) 1 lb 3½ ozs.
  • Documentación / Esquemas (1)
  • - - Manufacturers Literature (Rola Loudspeaker Data No. 11, April 1952.)
  • Autor
  • Modelo creado por Martin Kent. Ver en "Modificar Ficha" los participantes posteriores.

 Colecciones | Museos | Literatura

 Forum