Stereo Power Amplifier The Power Amp RB-5000
Rotel, The, Co., Ltd.; Tokyo
- Pays
- Japon
- Fabricant / Marque
- Rotel, The, Co., Ltd.; Tokyo
- Année
- 1978 ?
- Catégorie
- Amplificateur BF ou mélangeur BF
- Radiomuseum.org ID
- 150327
- No. de transistors
- Semi-conducteurs présents
- Semi-conducteurs
- Principe général
- Amplification audio
- Gammes d'ondes
- - sans
- Tension / type courant
- Alimentation Courant Alternatif (CA) / 100 or 120 or 220 or 240 Volt
- Haut-parleur
- - Ce modèle nécessite des HP externes
- Puissance de sortie
- 1000 W (sans distorsion)
- Matière
- Boitier métallique
- De Radiomuseum.org
- Modèle: Stereo Power Amplifier The Power Amp RB-5000 - Rotel, The, Co., Ltd.; Tokyo
- Forme
- Rack
- Dimensions (LHP)
- 482 x 240 x 430 mm / 19 x 9.4 x 16.9 inch
- Remarques
-
A 2 x 500 watt professional Hi-Fi stereo power amplifier, partner to the Rotel RC-5000 Stereo Control Amplifier. Connections for 3 pairs of loudspeakers (A, B, C). Push buttons for Power and Speakers A, B and C. Switch for Input (On, Off). Rotary controls for Left Level and Right Level. Rotary switches for Filter (Lab Test, Normal, Low Filter), Meter Sensitivity and Power Limiter (¼, ½, Full). Left and Right VU Power Meters and Left and Right Peak power indicators. Indicators for Standby, Protection, Overload.
Continuous Power Output :
500 watts per channel, min. RMS both channels driven into 8Ω
from 20Hz to 20kHz with no more than 0.009% Total Harmonic Distortion
Total Harmonic Distortion ......: No more than 0.009%
Intermodulation Distortion .... : No more than 0.009%
Damping Factor .................. : 180 (20Hz - 20kHz 8Ω)
Speaker load impedance .....: A,B,C: 4 - 16Ω ; A+B, B+C, A+C: 8 - 16Ω
Input Sensitivity/Impedance ..: RCA jack 1.0V/50kΩ ; Cannon jack 0.775V/600Ω
Frequency Response ...........: 15Hz - 110kHz, +0dB, -1dB (Normal)
Power consumption .............: 1.6kW (8Ω), 3.2kW (4Ω)Versions/Power Requirements
120 V AC 60Hz
220 V AC 50Hz
240 V AC 50Hz
100/120/220/240 V AC 50-60Hz SwitchableProfessionelle DC-Hochleistungs-Endstufe mit 2 x 500 Watt Sinus an 8 Ohm. Leistungsbandbreite 5 - 50.000 Hz, Klirrfaktor bei Nennausgangsleistung <0,009; Übertragungsbereich 0 -100.000 Hz.
Getrennte Netzteile für jeden Kanal, zusätzlich 1 Netzteil für Relaissteuerung und Anzeigeinstrumente.
2 grosse VU-Meter mit umschaltbarer Empfindlichkeit, je 8 Leuchtdioden pro Kanal zur Spitzenwertanzeige, 2-stufiger Leistungsbegrenzer.
Anschlussmöglichkeiten für 3 LS-Paare.
- Poids net
- 53 kg / 116 lb 11.8 oz (116.74 lb)
- Source
- -- Original prospect or advert
- Littérature
- Reviewed by Stereo Review magazine September 1978
- Schémathèque (1)
- - - Manufacturers Literature (Owner's Manual for the RB-5000)
- Schémathèque (2)
- - - Manufacturers Literature (Technical Manual for the RB-5000 dated 78-06)
- Auteur
- Modèle crée par Franz Scharner. Voir les propositions de modification pour les contributeurs supplémentaires.
- D'autres Modèles
-
Vous pourrez trouver sous ce lien 338 modèles d'appareils, 327 avec des images et 32 avec des schémas.
Tous les appareils de Rotel, The, Co., Ltd.; Tokyo