Solid state AM/FM Stereo Receiver RX-600A

Roland Electronics Co. Ltd., Rotel; Tokyo

Data
Forum
Pictures
Collections

  • Year
  • 1973 ?
  • Category
  • Broadcast Receiver - or past WW2 Tuner
  • Radiomuseum.org ID
  • 150482

 Technical Specifications

  • Number of Transistors
  • Semiconductors present.
  • Semiconductors
  • Main principle
  • Superheterodyne (common)
  • Wave bands
  • Broadcast (BC) and FM or UHF.
  • Power type and voltage
  • Alternating Current supply (AC) / 100; 117; 220; 240 Volt
  • Loudspeaker
  • - This model requires external speaker(s).
  • Power out
  • 90 W (140 W max.)
  • Material
  • Wooden case
  • from Radiomuseum.org
  • Model: Solid state AM/FM Stereo Receiver RX-600A - Roland Electronics Co. Ltd.,
  • Shape
  • Book-shelf unit.
  • Dimensions (WHD)
  • 18 x 5.08 x 12.5 inch / 457 x 129 x 318 mm
  • Notes

  • Rotel Solid State AM/FM Stereo Receiver Model RX-600A.
    Music Power 140 Watts into 4 ohms, 100 Watts into 8 ohms
    Continuous Power (RMS) 45 Watts per channel into 4 ohms
    30 Watts per channel into 8 ohms
    Power Bandwidth (IHF) 15 - 45000Hz
    Frequency Response 9 - 100.000 Hz
    Pre-Amp Outputs and Main-Amp Inputs
    Illuminated AM/FM Signal Strength Tuning Meter, FM Center Tuning Meter, Dial Board and Dial Pointer
    Front Panel Headphone Jack
    Rear Panel Speaker Matrix Switch for simulated 4-Channel
     

  • Net weight (2.2 lb = 1 kg)
  • 8.9 kg / 19 lb 9.7 oz (19.604 lb)
  • Source of data
  • -- Original prospect or advert
  • Author
  • Model page created by Franz Scharner. See "Data change" for further contributors.

 Collections | Museums | Literature

 Forum