Stereo Power Amplifier RB-990BX

Roland Electronics Co. Ltd., Rotel; Tokyo

Datos
Foro
Imágenes
Colecciones

  • Año
  • 1992–1997 ?
  • Categoría
  • Amplificador de audio o mezclador
  • Radiomuseum.org ID
  • 274644

Haga clic en la miniatura esquemática para solicitarlo como documento gratuito.

 Especificaciones técnicas

  • Numero de transistores
  • Hay semiconductores.
  • Semiconductores
  • Principio principal
  • Amplificador de Audio
  • Gama de ondas
  • - no hay
  • Especialidades
  • Hi-Fi equipment
  • Tensión de funcionamiento
  • Red: Corriente alterna (CA, Inglés = AC) / 100; 120; 220; 240 Volt
  • Altavoz
  • - Este modelo usa altavoz exterior (1 o más).
  • Potencia de salida
  • 400 W (660 W max.)
  • Material
  • Metálico
  • de Radiomuseum.org
  • Modelo: Stereo Power Amplifier RB-990BX - Roland Electronics Co. Ltd.,
  • Forma
  • Unidad para estanteria.
  • Ancho, altura, profundidad
  • 440 x 120 x 375 mm / 17.3 x 4.7 x 14.8 inch
  • Anotaciones

  • A hi-fi stereo power amplifier with output power of 200 watts RMS per channel into 8 ohms (0.03% THD) or 330 watts DIN per channel into 4 ohms (THD 1%). With a Protection Circuit. The Rotel RC-980BX or Rotel RC-990BX were available separately as matching Stereo Control Amplifiers. With Power press button switch, indicators for Power and Protection, RCA phono Left and Right input sockets for connection to the Pre-amplifier, terminals for one pair of Loudspeakers and an AC outlet.

    Specification  
    Continuous Power Output RMS 200 watts per channel, min. RMS
    both channels driven into 8Ω
    from 20 to 20,000Hz with
    no more than 0.03% THD
    Power Output DIN 330 watts per channel (1kHz, 4Ω, 1% THD)
    Peak Current 120A (0.1Ω, 10µsec, 1 pulse)
    Total Harmonic Distortion
    (20 to 20,000 Hz)    		 No more than 0.03%
    (continuous rated power output)
    No more than 0.01%
    (continuous 1/2 rated power output)
    Intermodulation Distortion
    (60 Hz : 7 kHz = 4:1)    		 No more than 0.02%
    (continuous rated power output)
    Output Speaker 8Ω nominal
    Damping Factor 1000 (20 - 20,000 Hz, 8Ω)
    Input Sensitivity/Impedance 1.0V/33kΩ
    Frequency Response 4 - 100,000Hz,+0.5dB,-3.0dB
    Signal-to-Noise Ratio
    (IHF A network)    		 120dB

    Versions/Power Requirements (Depending on Destination)
    120V AC 60Hz
    220V AC 50Hz
    240V AC 50Hz
    100V AC 50/60Hz

    Power Consumption max. 550 Watts

  • Peso neto
  • 15.5 kg / 34 lb 2.3 oz (34.141 lb)
  • Mencionado en
  • -- Original prospect or advert (Rotel Home Theater Components brochure dated 1996)
  • Documentación / Esquemas (1)
  • - - Manufacturers Literature (Owner's manual RB-990BX)
  • Documentación / Esquemas (2)
  • - - Manufacturers Literature (Technical manual RB-990BX)
  • Autor
  • Modelo creado por Franz Scharner. Ver en "Modificar Ficha" los participantes posteriores.

 Colecciones | Museos | Literatura

 Forum