Stereo Receiver RX-102

Rotel, The, Co., Ltd.; Tokyo

Datos
Foro
Imágenes
Colecciones

  • Año
  • 1974 ?
  • Categoría
  • Radio - o Sintonizador pasado WW2
  • Radiomuseum.org ID
  • 308598

 Especificaciones técnicas

  • Numero de transistores
  • Hay semiconductores.
  • Semiconductores
  • Principio principal
  • Superheterodino en general; ZF/IF 455/10700 kHz
  • Gama de ondas
  • OM y FM
  • Especialidades
  • Hi-Fi equipment
  • Tensión de funcionamiento
  • Red: Corriente alterna (CA, Inglés = AC) / 120 or 220 or 240 Volt
  • Altavoz
  • - Este modelo usa altavoz exterior (1 o más).
  • Potencia de salida
  • 11 W (undistorted)
  • Material
  • Madera
  • de Radiomuseum.org
  • Modelo: Stereo Receiver RX-102 - Rotel, The, Co., Ltd.; Tokyo
  • Forma
  • Unidad para estanteria.
  • Ancho, altura, profundidad
  • 474 x 114 x 267 mm / 18.7 x 4.5 x 10.5 inch
  • Anotaciones

  • A Stereo Hi-Fi Receiver with an AM/FM Tuner covering MW (525-1650kHz) and VHF (88-108 MHz) and a 2 x 5.5 watt Amplifier. On the rear, DIN sockets for MM cartridge and Tape PB/REC, RCA input sockets for MM and Ceramic cartidges, 8 Track Cartridge Player and Tape (IN and OUT), 75Ω and 300Ω connections for FM antenna and connection for outdoor AM antenna, connections for two pairs of loudspeakers (Main and Remote) and Switched AC Outlet. On the front, push button switches for Power on/off, Speakers (Main, Remote), Loudness and Tape Monitor, Rotary controls for Bass, Treble, Balance, Volume and Tuning, Rotary Function switch (AM, FM, FM Stereo, Phono, Tape/Aux), Tuning Meter and FM Stereo Indicator. Socket for Headphones. Illuminated dial.

    Continuous Power Output :
    5.5 watts per channel, min. RMS both channels driven into 8Ω
    from 60Hz to 20kHz with no more than 1% Total Harmonic Distortion
    Intermodulation Distortion ....... :  <1% at rated output
    Frequency Response ..............:  30Hz - 40kHz,  ± 3dB
    Damping Factor .......................:  30 (8Ω, 1kHz)
    Input Sensitivity/Impedance ......:
                            Tape Monitor.....:  140mV/40kΩ
                            Tape/Aux ..........:  150mV/42kΩ
                            Phono MM.........:  2.4mV/50kΩ
                            Phono Ceramic :  110mV/270Ω
    Hum & Noise S/N ......................:
                              Phono ............:   64dB
                              Tape ...............:  74dB
    Loudspeaker load impedance ..:  8 - 16Ω

    Versions/Power Requirements
    120 V AC 60Hz
    220 V AC 50-60Hz
    240 V AC 50-60Hz

    See also the later similar Rotel RX-102 Mk II Stereo Receiver.

    Made in Taiwan

  • Peso neto
  • 5 kg / 11 lb 0.2 oz (11.013 lb)
  • Documentación / Esquemas (1)
  • - - Manufacturers Literature (Owner's Manual for the RX-102 AM/FM Stereo Hi-Fi Receiver)
  • Documentación / Esquemas (2)
  • - - Manufacturers Literature (Technical Manual for the RX-102 AM/FM Receiver & RA-112 Stereo Pre/Main Amplifier)
  • Autor
  • Modelo creado por Howard Craven. Ver en "Modificar Ficha" los participantes posteriores.

 Colecciones | Museos | Literatura

Colecciones

El modelo Stereo Receiver es parte de las colecciones de los siguientes miembros.

 Forum