Stereo Receiver RX-202

Rotel, The, Co., Ltd.; Tokyo

Données
Forum
Images
Collections

  • Année
  • 1974 ?
  • Catégorie
  • Radio - ou tuner d'après la guerre 1939-45
  • Radiomuseum.org ID
  • 212892

 Spécifications techniques

  • No. de transistors
  • Semi-conducteurs présents
  • Semi-conducteurs
  • Principe général
  • Super hétérodyne (en général)
  • Gammes d'ondes
  • PO et FM
  • Particularités
  • Equipement HIFI
  • Tension / type courant
  • Alimentation Courant Alternatif (CA) / 120; 220; 240 Volt
  • Haut-parleur
  • - Ce modèle nécessite des HP externes
  • Puissance de sortie
  • 30 W (sans distorsion)
  • Matière
  • Boitier en bois
  • De Radiomuseum.org
  • Modèle: Stereo Receiver RX-202 - Rotel, The, Co., Ltd.; Tokyo
  • Forme
  • Appareil d'étagère
  • Dimensions (LHP)
  • 474 x 114 x 267 mm / 18.7 x 4.5 x 10.5 inch
  • Remarques

  • An AM/FM stereo hi-fi receiver with a stereo tuner covering MW and FM and an integrated amplifier with output power of 2 x 15 watts RMS into 8 ohms. Housed in a walnut veneer cabinet with a silver or black front. Tuning Meter, Rotary Bass and Treble tone controls, push button switches for Speakers 1 and 2, High Filter, Loudness and Tape Monitor,  terminals for FM and AM antennae, RCA phono or DIN sockets for phono cartridge (Magnetic and Ceramic) and Tape/Aux input, and for Tape output, terminals for two pairs of loudspeakers, a switch for simulated 4 channel, jack for headphones and a switched AC outlet.

    Specification  
    Amplifier Section  
    Continuous Power Output 15 watts per channel min. RMS
    all channels driven into 8Ω
    from 50 to 20,000Hz with
    no more than 1% Total Harmonic Distortion
    IM Distortion less than 0.5% at rated output
    Frequency Response 20 - 70,000 Hz ±3dB at 1 watt
    Damping Factor  30 (8Ω, 1kHz)
    Input Sensitivity/Impedance TAPE MONITOR 110mV/40kΩ
    TAPE/AUX 110mV/40kΩ
    PHONO MAG 2.2mV/45kΩ
    PHONO CER 130mV/100kΩ
    Phono Equalization RIAA STD. ±1.5dB
    Crosstalk 50dB/10kHz
    Hum and Noise (S/N)
     (continuous power output)    		 PHONO 65dB
    TAPE 80dB
    Residual 0.5mV
    Speaker Impedance 4 to 16Ω
    FM Tuner Section  
    Frequency Range 88 - 108 MHz
    Sensitivity (IHF) 2.9 µV
    Signal-to-Noise Ratio 65dB
    Harmonic Distortion 0.2%
    Selectivity 40dB ±400kHz
    Capture Ratio 3dB
    Stereo Separation 35dB at 1 kHz
    IF Rejection 70dB
    Image Rejection 55dB
    Spurious Response Rejection 50dB
    AM Tuner Section  
    Frequency Range 525 to 1650 kHz
    Sensitivity 20 µV
    Selectivity 25dB ±10kHz
    IF Rejection  45dB
    Image Rejection 50dB

    Versions/Power Requirements
    120V AC 60Hz
    220V or 240V AC 50/60 Hz

    Power Consumption: 115W

    See also the similar later Rotel RX-202MkII Stereo Receiver.

  • Poids net
  • 6 kg / 13 lb 3.5 oz (13.216 lb)
  • Schémathèque (1)
  • - - Manufacturers Literature (Owner's Manual RX-202)
  • Schémathèque (2)
  • - - Manufacturers Literature (Service Manual RX-202)
  • Auteur
  • Modèle crée par Franz Scharner. Voir les propositions de modification pour les contributeurs supplémentaires.

 Collections | Musées | Littérature

 Forum