Goldy 3133
Schaub und Schaub-Lorenz
- País
- Alemania
- Fabricante / Marca
- Schaub und Schaub-Lorenz
- Año
- 1955/1956
- Categoría
- Radio - o Sintonizador pasado WW2
- Radiomuseum.org ID
- 20392
Schaub-Lorenz: Goldy 3133
Netztrafo nicht original
S.-Nr. 409824
Netztrafo nicht original
Netztrafo nicht original
Netztrafo nicht original
Funk-Technik 1955 / Heft 21 / Seite 603
my Goldy from Shaublorenz
EM85 neu
Haga clic en la miniatura esquemática para solicitarlo como documento gratuito.
- Numero de valvulas
- 7
- Principio principal
- Superheterodino en general; ZF/IF 460/10700 kHz
- Número de circuitos sintonía
- 6 Circuíto(s) AM 11 Circuíto(s) FM
- Gama de ondas
- OM, OL, OC y FM
- Tensión de funcionamiento
- Red: Corriente alterna (CA, Inglés = AC) / 110; 127; 155; 220 Volt
- Altavoz
- Altavoz elíptico de imán permanente.
- Material
- Madera
- de Radiomuseum.org
- Modelo: Goldy 3133 - Schaub und Schaub-Lorenz
- Forma
- Sobremesa de botonera.
- Ancho, altura, profundidad
- 440 x 280 x 200 mm / 17.3 x 11 x 7.9 inch
- Peso neto
- 6.4 kg / 14 lb 1.6 oz (14.097 lb)
- Precio durante el primer año
- 249.00 DM
- Ext. procedencia de los datos
- Erb
- Procedencia de los datos
- HdB d.Rdf-& Ferns-GrH 1955/56
- Otros modelos
-
Donde encontrará 972 modelos, 830 con imágenes y 690 con esquemas.
Ir al listado general de Schaub und Schaub-Lorenz
Colecciones
El modelo Goldy es parte de las colecciones de los siguientes miembros.
Contribuciones en el Foro acerca de este modelo: Schaub und Schaub-: Goldy 3133
Hilos: 2 | Mensajes: 17
Hallo Freunde,
welchen Ersatz-Lautsprecher würdet Ihr für meinen Schaub-Lorenz Goldy 3133 empfehlen?
Ich habe leider den originalen Lautsprecher nicht mehr und kenne dessen Impedanz nicht.
Danke!
Markus
Markus Amende, 05.Mar.18
Dear Radio Friends
I've one Goldy II P (type 3620).
It's similar to 3133, so its schematic had been very useful to fix it.
The output transformer was repaired and some caps had been changed.
Now it is working.
BUT......:
It sounds loud (normal) in LW,MW, KW, but very low in UKW.
- A better aerial doesn't improve this a bit.
- ECC85 is not the problem (It was already checked).
- Also I can´t understand why its "Magic eye" tube shows better input signals in UKW than in MW, LW,KW. It might be the opposite....Don't you agree?
Do You know this models?
Do You help me? Some help would be very welcome.
Best regards
Mário
I've one Goldy II P (type 3620).
It's similar to 3133, so its schematic had been very useful to fix it.
The output transformer was repaired and some caps had been changed.
Now it is working.
BUT......:
It sounds loud (normal) in LW,MW, KW, but very low in UKW.
- A better aerial doesn't improve this a bit.
- ECC85 is not the problem (It was already checked).
- Also I can´t understand why its "Magic eye" tube shows better input signals in UKW than in MW, LW,KW. It might be the opposite....Don't you agree?
Do You know this models?
Do You help me? Some help would be very welcome.
Best regards
Mário
Mario Coelho, 23.Dec.04