• Jahr
  • 1970 ??
  • Kategorie
  • Service- oder Labor-Ausrüstung
  • Radiomuseum.org ID
  • 253300

 Technische Daten

  • Wellenbereiche
  • Wellen in den Bemerkungen.
  • Betriebsart / Volt
  • Keine Stromversorgung
  • Lautsprecher
  • - - Kein Ausgang für Schallwiedergabe.
  • Material
  • Metallausführung
  • von Radiomuseum.org
  • Modell: Step Attenuator 75 Ohms - Scientific Atlanta, Inc.;
  • Form
  • Tischgerät ohne Drucktasten, bis 35 cm Breite (Kleingerät, meist dekorativ. Nur für Netzbetrieb, doch Transportgriff möglich).
  • Abmessungen (BHT)
  • 210 x 47 x 55 mm / 8.3 x 1.9 x 2.2 inch
  • Bemerkung
  • Resistive Variable Step Attenuator; attenuation 1 dB, 3 dB, 6 dB, 10 dB (two switch) and 20 dB (two switch) increments via individual switches, up to a total of 70 dB; minimum attenuation 1 dB, maximum attenuation 70 dB; maximum input power 0.5 W; Input/Output Impedance 75 ohms; IN/OUT BNC connectors; measured frequency range from about 100 kHz to 200 MHz with about +/-10% attenuation error; usable up to about 1 GHz with decreasing attenuation.

  • Nettogewicht
  • 0.9 kg / 1 lb 15.7 oz (1.982 lb)
  • Autor
  • Modellseite von Emilio Focosi angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.

 Sammlungen | Museen | Literatur

Sammlungen

Das Modell Step Attenuator befindet sich in den Sammlungen folgender Mitglieder.

 Forum