200 MBaud Optoelectronic Receiver V23804-E2-T5

The Siemens V23804-E2-T5 200 MBaud Optoelectronic Receiver was manufactured in the early 1990s by the Siemens Electromechanical Components (EC) and Fibre Optic Components (LWL) facility at Wernerwerkdamm 16, Berlin. The receiver converts 1300 nm optical digital signals to differential ECL 100K-compatible electrical signals and includes a Signal-Detect function for link monitoring. It uses an InGa/InP photodiode and is housed in a hermetic 20-pin DIL metal package with an ST receptacle. The receiver operates with a single 5 V power supply (Vee grounded), but an alternative version could also be supplied for operation with a -5 V supply (Vcc grounded).

A third version of the receiver was fitted with an SMA instead of an ST receptacle. That model only operates from a 5 V supply.

Supply voltage Vcc 4.75 - 5.5 V
Max supply current (excluding load current) 75 mA
Max output current 25 mA
Data/Signal-Detect output voltage low 3.19 - 3.38 V
Data/Signal-Detect output voltage high 3.98 - 4.12 V
(Vcc 5 V; Load 50 Ω at 3 V)
Max optical input power (saturation) -14.5 dBm
Min optical input power -33 dBm
Input power increase due to 100,000 hours ageing 0.5 dB
Signal-Detect asserted -44.5 to -33 dB
Signal-Detect deasserted -45 to -33.5 dB
Signal-Detect hysteresis -0.5 to 2 dB
Data rate 10 - 200 MBaud
Rise and fall time 0.5 - 1.3 ns
Duty cycle distortion 0.05 ns pk-pk
Data-dependent jitter 0.3 ns pk-pk
Random jitter at -33 dBm 0.25 ns rms
Operating temperature 0 - 70 ˚C
Storage temperature -40 - 85 ˚C

Vous pourrez trouver sous ce lien 2523 modèles d'appareils, 2120 avec des images et 1333 avec des schémas.
Tous les appareils de Siemens (& Halske, -Schuckert Werke SSW, Electrogeräte); Berlin, München