Power Audio Amplifier Module Z 60

Sinclair Radionics Ltd.; St. Ives (Cambridge)

  • Année
  • 1974 ?
  • Catégorie
  • Amplificateur BF ou mélangeur BF
  • Radiomuseum.org ID
  • 340643

 Spécifications techniques

  • No. de transistors
  • 12
  • Semi-conducteurs
  • Principe général
  • Amplification audio
  • Gammes d'ondes
  • - sans
  • Tension / type courant
  • Alimentation externe ou alimentation principale / 10 - 50 Volt
  • Haut-parleur
  • - Ce modèle nécessite des HP externes
  • Matière
  • Circuits imprimés
  • De Radiomuseum.org
  • Modèle: Power Audio Amplifier Module Z 60 - Sinclair Radionics Ltd.; St.
  • Forme
  • Chassis (pour intégration dans meuble)
  • Dimensions (LHP)
  • 55 x 98 x 20 mm / 2.2 x 3.9 x 0.8 inch
  • Remarques
  • Power Audio Amplifier Module, Z60

    Both the Z40 & Z60 were intended for use with the Project 80 series of modules, these amps were readily adapted to an even wider range of uses. Both offer short circuit current limiting and overload protection etc.

    Specifications:
     

    Input Sensitivity: 90 mV for 12 W into 8 Ω
    Power Output: 25 W rms into 8 Ω, at 50 V
      40 W rms into 4 Ω, at 50 V
    Distortion: 0.2% at 10 W, 8 Ω, 1 kHz
    Signal to Noise Ratio: 70 dB
    Frequency Response: 15 Hz to 200 kHz ±3 dB
    Voltage gain: 55 ± 5%
    Input Z: 100 kΩ + 10%
    Permissible Load: 4 Ω, or greater
  • Littérature
  • -- Original prospect or advert (“CQ Elettronica”, Italy, CD editor, number 11/119, November 1976.)
  • Auteur
  • Modèle crée par Pier Antonio Aluffi. Voir les propositions de modification pour les contributeurs supplémentaires.

 Collections | Musées | Littérature

 Forum