Pulse Generator GO 1101

Solartron Laboratory Instruments Ltd.; Surrey

Data
Forum
Pictures
Collections

  • Year
  • 1962 ?
  • Category
  • Service- or Lab Equipment
  • Radiomuseum.org ID
  • 329637

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Wave bands
  • - without
  • Power type and voltage
  • Alternating Current supply (AC)
  • Loudspeaker
  • - - No sound reproduction output.
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: Pulse Generator GO 1101 - Solartron Laboratory
  • Notes

  • The pulse repetition rate of the GO 1101 is continuously variable from 10Hz to 500kHz, (2µsec to 100msec period), and can be controlled by internally or externally derived trigger pulses. The pulse amplitude is  adjustable over the range 0.5V to 100V, positive or over the range 0.5V to 100V, positive or negative-going, with switched selection of single or double-  pulse output. The duration of the main pulse can be set to any time between 1µsec and 100msec, and the incidence of the main pulse delayed on the pre-pulse by any period between 1µsec and 10msec. The negative-going edge of a 3V amplitude main pulse has a rise-time of less than 12nsec. Useful additional attributes are the ability to generate a square-wave signal over the frequency range 10Hz to 500kHz, and to square a sine-wave or approximate square wave input of any frequency between 25Hz and 5MHz. An external synchronization facility enables the GO 1101 to be employed as an oscilloscope sweep-delay generator or frequency divider.

  • Mentioned in
  • -- Original-techn. papers. (Electronic Engineering, volume 34, year 1962)
  • Author
  • Model page created by Pier Antonio Aluffi. See "Data change" for further contributors.

 Collections | Museums | Literature

 Forum