FTDX-150

Sommerkamp

  • Jahr
  • 1968 ??
  • Kategorie
  • Amateur TRX: Sender & Empfänger (und Sendeempfänger)
  • Radiomuseum.org ID
  • 99770
    • anderer Name: Sommerkamp El. Schweiz

Klicken Sie auf den Schaltplanausschnitt, um diesen kostenlos als Dokument anzufordern.

 Technische Daten

  • Anzahl Röhren
  • 3
  • Anzahl Transistoren
  • 32
  • Hauptprinzip
  • ZF/IF 3180 kHz
  • Wellenbereiche
  • Kurzwellen (nur KW)
  • Betriebsart / Volt
  • Netz- / Batteriespeisung / 50-60 Hz: 100; 110; 200; 220 / DC: 12 Volt
  • Lautsprecher
  • - Dieses Modell benötigt externe(n) Lautsprecher.
  • Belastbarkeit / Leistung
  • 1 W (Qualität unbekannt)
  • Material
  • Metallausführung

Die GFGF Zeitschrift Funkgeschichte bringt interessante Artikel zu Radios, Funkwesen und Medien. Bei Radiomuseum.org finden Sie die vollständigen Hefte früherer Ausgaben als PDF zum Download.

  • von Radiomuseum.org
  • Modell: FTDX-150 - Sommerkamp
  • Form
  • Tischgerät-gross, - Querformat (breiter als hoch oder quadratisch).
  • Abmessungen (BHT)
  • 340 x 150 x 260 mm / 13.4 x 5.9 x 10.2 inch
  • Bemerkung
  • Sommerkamp HF-Transceiver FTDX150.
    Frequency range: 3.5-4 MHz, 7-7.5 MHz, 14-14.5 MHz, 21-21.5 MHz, 28-30 MHz; Modes: SSB, CW, AM; Pin: 150 W PEP.

    A transceiver operating in SSB/CW/AM modes on frequency ranges from 3.5 MHz to 29.5 MHz in seven bands.
    Power output to final stage: 120 W PEP in SSB/CW and 50 W in AM.
    Antenna impedance 40 to 100 Ω unbalanced.
    Sensitivity of the receiver: Less than 1 µV for 10 dB. S/S+N ratio.
    Frequency ranges:
    Band                           Frequency range
    80                               3.5  to    4.0 MHz
    40                               7.0  to    7.5 MHz
    20                             14.0  to  14.5 MHz
    15                             21.0  to  21.5 MHz
    10A                           28.0  to  28.5 MHz
    10B                           28.0  to  29.0 MHz
    10C                           28.0  to  29.5 MHz.

    Built to operate with the AC network as a base station or with the voltage (12 V DC) of the vehicle battery on which it can be installed. The choice of the power supply is made automatically by using the appropriate cable.

    3 Tubes, 32 Transistors, 25 Diodes. 1 Thermistor and 17 Crystals. Semiconductors listed once per type and not all.

  • Nettogewicht
  • 18 kg / 39 lb 10.4 oz (39.648 lb)
  • Datenherkunft
  • -- Original prospect or advert
  • Literaturnachweis
  • -- Original-techn. papers. (Original manual service.)
  • Autor
  • Modellseite von Otto Frosinn angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.

 Sammlungen | Museen | Literatur

Sammlungen

Das Modell befindet sich in den Sammlungen folgender Mitglieder.

 Forum