613 Ch= 61

Standard Telephones and Cables Pty, Ltd (STC), Sydney

Daten
Forum
Bilder
Sammlungen

  • Jahr
  • 1936
  • Kategorie
  • Rundfunkempfänger (Radio - oder Tuner nach WW2)
  • Radiomuseum.org ID
  • 169790

Klicken Sie auf den Schaltplanausschnitt, um diesen kostenlos als Dokument anzufordern.

 Technische Daten

  • Anzahl Röhren
  • 7
  • Hauptprinzip
  • Super mit HF-Vorstufe; ZF/IF 175 kHz; 2 NF-Stufe(n)
  • Anzahl Kreise
  • 7 Kreis(e) AM
  • Wellenbereiche
  • Mittelwelle, keine anderen.
  • Betriebsart / Volt
  • Wechselstromspeisung / 200-250 Volt
  • Lautsprecher
  • Dynamischer LS, mit Erregerspule (elektrodynamisch) / Ø 8 inch = 20.3 cm
  • Material
  • Gerät mit Holzgehäuse
  • von Radiomuseum.org
  • Modell: 613 Ch= 61 - Standard Telephones and Cables
  • Form
  • Standgerät auf niedrigen Beinen (Beine < 50 % der Gesamthöhe).
  • Bemerkung

  • STC Model 613 is a six-valve receiver designed for broadcast coverage and operation from 200-250 volts AC mains.
     

    This receiver is of the console type and is fitted with three controls, these being for volume, tuning, and tone (continuous). The loudspeaker fitted is an 8-inch unit with field-coil resistance of 2,500 Ω. The external features are completed by the provision of a type 6E5 tuning indicator.

    The chassis fitted to this model is known as “type 61”.

    The design of this receiver is fairly straightforward & its analysis should present no particular difficulties. Atten should be paid to the fact that all the valves (except tuning indicator) are of the metal envelope series, and it should be remembered that if for any reason, replacement of any of these “radio” valves with octal-glass types becomes necessary, realignment of the tuning circuits associated with that valve (or valves) will be essential. Finally, care should be taken to see the power cord connector (SP 3106) is inserted into its socket correctly (i.e., with the marking to suit the AC supply voltage facing upwards).

    *SPECIAL NOTE.

    There is apparently a draughtsman’s error in the circuit diagram of this model, in the oscillator plate supply is shown as being obtained from the lower voltage tapping on the voltage divider than that which feeds the screens. It will be found that relative positions of the clips are reverse to those shown; in which case no attempt should be made to change the connections over to the positions shown in the diagram.

    Radio Trade Annual 1938, Page 329.

    *See modified schematic.

  • Originalpreis
  • 30.00 Aus£
  • Literatur/Schema (1)
  • Radio Trade Annual 1938 P327.
  • Autor
  • Modellseite von Stuart Irwin angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.

 Sammlungen | Museen | Literatur

 Forum