Stereo Amplifier A21 Series Three (3)
Sugden, J.E., Heckmondwike, West Yorkshire
- Pays
- Royaume Uni
- Fabricant / Marque
- Sugden, J.E., Heckmondwike, West Yorkshire
- Année
- 1972
- Catégorie
- Amplificateur BF ou mélangeur BF
- Radiomuseum.org ID
- 314592
- No. de transistors
- 28
- Semi-conducteurs
- BC109 BC109 BC109 BC109 BC109C ZTX341 BFY52 BC548 BC548 BC558 BD519 BD520 2N3055 MJ2955 BC109 BC109 BC109 BC109 BC109C ZTX341 BFY52 BC548 BC548 BC558 BD519 BD520 2N3055 MJ2955
- Principe général
- Amplification audio
- Gammes d'ondes
- - sans
- Particularités
- Equipement HIFI
- Tension / type courant
- Alimentation Courant Alternatif (CA) / 110; 120; 220; 230; 240 Volt
- Haut-parleur
- - Ce modèle nécessite des HP externes
- Puissance de sortie
- 40 W (50 W max.)
- Matière
- Boitier en bois
- De Radiomuseum.org
- Modèle: Stereo Amplifier A21 Series Three - Sugden, J.E., Heckmondwike,
- Forme
- Appareil d'étagère
- Dimensions (LHP)
- 15.5 x 5 x 9 inch / 394 x 127 x 229 mm
- Remarques
-
A hi-fi stereo integrated amplifier with class A/B output power of 20 watts RMS per channel into 8 ohm or 25 watts RMS per channel into 4 ohm. Inputs for phono, radio, aux and tape. Terminals for 1 pair of loudspeakers, jack for headphones.
SPECIFICATION (all levels quoted ± 1dB) Power output: 20 watts RMS per channel both channels driven
at clipping level into 8Ω loads or 25 watts into 4Ω loads.THD less than 0.1%, mainly 2nd & 3rd harmonic, negligible proportion of high order harmonics and reducing in proportion with reducing power. Frequency and power response ±1dB 30Hz to 20KHz. Output to tape recorder direct connection from radio and aux. inputs, 200mV from disc amplifier when correctly loaded at average modulation. Input sensitivity: Radio, Tape, Aux 100mV into 200kΩ flat response Magnetic Cartridge 2.5mV into 47kΩ, equalized to R.I.A.A. Ceramic Cartridge 50mV into special input circuit. Signal to noise ratio (30 phon weighting) 80dB on radio, aux. and tape inputs. 70dB on disc inputs Interchannel crosstalk typically 40dB 20Hz - 10KHz, dependent upon input load impedance Rumble Filter Built in on disc input, 18dB per octave below 30Hz. Push buttons to select: Inputs DISC, RADIO, AUXILIARY, TAPE. High frequency filter 12dB per octave above 7KHz. Function Mono, Stereo, Input Right, Input Left. Power consumption 70 watts maximum.
- Poids net
- 20 lb (20 lb 0 oz) / 9.080 kg
- Schémathèque (1)
- - - Manufacturers Literature (Instruction leaflet)
- Auteur
- Modèle crée par Howard Craven. Voir les propositions de modification pour les contributeurs supplémentaires.
- D'autres Modèles
-
Vous pourrez trouver sous ce lien 12 modèles d'appareils, 12 avec des images et 2 avec des schémas.
Tous les appareils de Sugden, J.E., Heckmondwike, West Yorkshire