Single Sideband Transceiver SW-175
Swan Electronics, Oceanside, CA
- Country
- United States of America (USA)
- Manufacturer / Brand
- Swan Electronics, Oceanside, CA
- Year
- 1961 ?
- Category
- Amateur TRX: Transmitter/Receiver (and Transceiver)
- Radiomuseum.org ID
- 329816
Click on the schematic thumbnail to request the schematic as a free document.
- Number of Tubes
- 14
- Main principle
- Transceiver
- Wave bands
- Short Wave (SW only)
- Power type and voltage
- Powered by external power supply or a main unit. / 105-125 Volt
- Loudspeaker
- - This model requires external speaker(s).
- Power out
- 240 W (unknown quality)
- Material
- Metal case
- from Radiomuseum.org
- Model: Single Sideband Transceiver SW-175 - Swan Electronics, Oceanside,
- Shape
- Tablemodel without push buttons, Mantel/Midget/Compact up to 14
- Dimensions (WHD)
- 13.25 x 5.7 x 11 inch / 337 x 145 x 279 mm
- Notes
-
The Swan 175 is the 75 meter version of a series of three amateur band SSB transceivers known as "mono-banders" because of their single band design. RF input is rated at 240 watts P.E.P. using a 6DQ5 tube. Other tranceivers in the series are the 120 and the 140 designed for 20 and 40 meters respectively. Like most monobanders, an external power supply is used since the unit could then also be used in mobile applications. The manual for the 175 gives instructions for modifying a Heathkit HP-20 power supply to match the Swan. The weight shown does not include a power supply.
- Net weight (2.2 lb = 1 kg)
- 11 lb (11 lb 0 oz) / 4.994 kg
- Author
- Model page created by Rich Post. See "Data change" for further contributors.
- Other Models
-
Here you find 45 models, 39 with images and 17 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
All listed radios etc. from Swan Electronics, Oceanside, CA
Collections
The model Single Sideband Transceiver is part of the collections of the following members.