• Country
• People's Republic of China

• Manufacturer / Brand
• Tecsun 德生通用电器制造有限公司 Tecsun General Electric Manufacturing Co., Ltd; Dongguan (Guangdong, SC)

• Year
• 2014 ?

• Category
• Broadcast Receiver - or past WW2 Tuner

• Radiomuseum.org ID
• 325003

Click on the schematic thumbnail to request the schematic as a free document.

• Number of Transistors
• Semiconductors present.

• Semiconductors

• Main principle
• DSP, Digital Signal Processor

• Wave bands
• Broadcast, Long Wave, more than 2 x SW plus FM or UHF.

• Power type and voltage
• Batteries / addl. power jack / 3.7 / 4.5 Volt

• Loudspeaker
• Permanent Magnet Dynamic (PDyn) Loudspeaker (moving coil) / Ø 5.7 cm = 2.2 inch

• Power out
• 0.18 W (max.)

• Material
• Plastics (no bakelite or catalin)

• from Radiomuseum.org
• Model: FM/SW/MW/LW DSP Receiver PL-310ET - Tecsun 德生通用电器制造有限公...

• Shape
• Very small Portable or Pocket-Set (Handheld) < 8 inch.

• Dimensions (WHD)
• 141 x 87 x 30 mm / 5.6 x 3.4 x 1.2 inch

• Notes

• This is a DSP world pocket radio based on the Silicon Labs Si4734 receiver IC. It features a Clock with Sleep timer and Alarm, offering FM stereo when using headphones.

  It runs with 4.5Volt from three UM3 AA dry batteries, or else with 3.7Volt from three Ni-MH UM3 AA rechargeable batteries (It can be set to use the built-in USB charger as well).

  Main specifications:

  • FM: Selectable between 87.5-108 MHz (EU/USA), or 64-108 MHz (Russia), or 76-108 MHz (Japan)
  • MW: Selectable between 522-1620 kHz at 9 kHz steps, or 520-1710 kHz at 10 kHz steps (USA)
  • LW: 153-513 kHz
  • SW:2300-21950 kHz
  • AM Bandwith: Selectable between 6, 4, 3, 2, and 1 kHz
  • Sensitivity: FM: <3 μV, MW <1 mV/m, LW <10 mV/m, SW <20 μV
  • 550 memories to store radio stations.
  • Audio output: 180 mW@10% distortion
  • Speaker: 500 mW, 16 Ω
  • Earphone Jack: 3.5 mm, 8 to 32 Ω, Stereo
  • Power Supply: UM3 or AA x 3, or USB 5V DC

  In terms of design, this radio uses two main PCBs, the analog PCB at the rear side, and the digital PCB at the front side.

  In the analog PCB: The SW signal from the antenna is shaped by two JFET (Q1 and Q2) in the RF front-end and passed to the Si4734 IC. The MW and FM signals are passively shaped and passed to the Si4734 IC. The CD1622CB stereo audio amplifier IC receives the L-R channels from the Si4734 IC in the digital PCB. A 2.7V power regulator IC (IC1) supplies energy for the MCU in the digital PCB. Semiconductor power switches are used to apply energy to the SW front-end, and to the audio amplifier.

  In the digital PCB: A Renesas R5F2L38ACDFP MCU manages all the radio operation, with the help of a LCD Display, a Keyboaard, two rotary encoders (Volume and Tuning), one TC24C32 EEPROM, a 32.768MHz crystal, a 0.22F/5.5V SuperCapacitor to store the 2.7V supply, a KLJ-8530 Dynamic Buzzer, and the Silicon Labs Si4734 radio receiver IC.

   

   

• Net weight (2.2 lb = 1 kg)
• 0.190 kg / 0 lb 6.7 oz (0.419 lb)

• Author
• Model page created by Jose Mesquita. See "Data change" for further contributors.

• Other Models

• Here you find 35 models, 34 with images and 21 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
  All listed radios etc. from Tecsun 德生通用电器制造有限公司 Tecsun General Electric Manufacturing Co., Ltd; Dongguan (Guangdong, SC)