Dual-Trace Amplifier 3A6
Tektronix; Portland, OR
- Land
- USA
- Hersteller / Marke
- Tektronix; Portland, OR
- Jahr
- 1964
- Kategorie
- Service- oder Labor-Ausrüstung
- Radiomuseum.org ID
- 231765
- Anzahl Röhren
- 8
- Anzahl Transistoren
- 24
- Halbleiter
- Hauptprinzip
- kein Zusatz
- Wellenbereiche
- - ohne
- Betriebsart / Volt
- Externes Speisegerät / Netzgerät / Hauptgerät
- Lautsprecher
- - - Kein Ausgang für Schallwiedergabe.
- Material
- Metallausführung
- von Radiomuseum.org
- Modell: Dual-Trace Amplifier 3A6 - Tektronix; Portland, OR
- Form
- Chassis - Einbaugerät
- Bemerkung
-
The Type 3A6 Dual-Trace Amplifier plug-in unit contains two identical amplifier channels. Either channel can be used independently for a single-trace display, or the two channels can be electronically switched for a dual-trace display. Also, the two channels can be added algebraically and the resultant waveform displayed on the indicator unit crt.
Cannot be used with a Type 560. Also, when used with a Type 2B67 or 3B2 time-base plug-in unit or with a Type 565 or RM565, it may not be possible to view the entire leading edge of the triggering waveform due to the delay of these time-base circuits.
Frequency Response
Dc to 10 mc (not more than 3 db down at 10 mc) with a corresponding risetime of typically 35 nanoseconds.
Deflection Factors
Ten calibrated steps for each channel; .01, .02, .05, .1, .2, .5, 1, 2, 5 and 10 volts/division. Variable control in each channel permits continuous, uncalibrated adjustment from 0.01 to about 25 volts/division in conjunction with the step switch.
Accuracy
Within ±3% of indicated deflection with VARIABLE in the CALIB position.
Input Impedance
1 megohm ±1%, paralled by about 47 pf.
Input Coupling
Ac or dc coupled, selected by front-panel switch. In the AC position low-frequency response is limited to about 2 cps (0.2 cps with 10 X passive probe).
Maximum Input Voltage
600 volts combined dc and peak ac; 600 volts peak-topeak ac.
Polarity Inversion
Polarity of Channel 1 can be changed to provide 180° inversion. No polarity inversion of Channel 2.
Operating Modes
Channel 1 only. Channel 2 only. Alternate between channels. Chopped between channels at approximately 150 kc rate. Added Algebraically.
Channel Isolation
50,000:1 or greater at 100 kc.
Triggering
Internal triggering signals for time base are provided from both channels or from Channel 1 only, determined by front-panel switch.
Construction: Aluminum alloy chassis and panel.
- Nettogewicht
- 6 lb (6 lb 0 oz) / 2.724 kg
- Originalpreis
- 540.00 USD
- Datenherkunft
- -- Original-techn. papers.
- Autor
- Modellseite von Pius Steiner angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.
- Weitere Modelle
-
Hier finden Sie 386 Modelle, davon 374 mit Bildern und 92 mit Schaltbildern.
Alle gelisteten Radios usw. von Tektronix; Portland, OR
Sammlungen
Das Modell Dual-Trace Amplifier befindet sich in den Sammlungen folgender Mitglieder.