• Land
• USA

• Hersteller / Marke
• Tektronix; Portland, OR

• Jahr
• 1983

• Kategorie
• Service- oder Labor-Ausrüstung

• Radiomuseum.org ID
• 198656

• Anzahl Transistoren
• Halbleiter vorhanden.

• Halbleiter

• Wellenbereiche
• - ohne

• Betriebsart / Volt
• Externes Speisegerät / Netzgerät / Hauptgerät

• Lautsprecher
• - - Kein Ausgang für Schallwiedergabe.

• Material
• Metallausführung

• von Radiomuseum.org
• Modell: Programmable Oscilloscope Calibration Generators CG5001 - Tektronix; Portland, OR

• Form
• Rack

• Abmessungen (BHT)
• 203 x 124 x 305 mm / 8 x 4.9 x 12 inch

• Bemerkung
• The Tektronix CG 5001/CG 551AP Programmable Oscilloscope Calibration Generators can be used as a part of a computerized system for the calibration and verification of major oscilloscope parameters, including:
  Vertical Gain
  Horizontal Timing and Gain
  Vertical Bandwidth/Pulse Response Characteristics
  Probe Accuracy and Compensation
  Current-Probe Accuracy
  Calibrator-Output Accuracy
  The CG 5001/CG 551AP feature a wide range of functions, all programmable by controller via the GPIB. A "Learn" mode allows any manually set function or range to be acquired by a controller. Subsequent use of the resulting program requires a minimum of operator skill and makes data logging an automatic operation. A CG 5001/CG551AP Controller test and calibration system can provide step by step to the operator, significantly reducing the skill level required for scope maintenance. The CG 5001/CG 551AP can be used in conjunction with the optional Comparator Head (015-0310-01) to calibrate built-in oscilloscope calibrators. Both the oscilloscope calibrator and the CG 5001 signals are applied to the Comparator Head and simultaneously displayed on the scope's CRT. The CG 5001 signals are then varied to obtain congruent displays. Errors are automatic ally displayed on the readout. The Remote Variable option, the Units/Div, Variable-Fixed button, the Continue push-button, and the VAR allow remote operation of the system. The CG 5001/CG 551AP is designed to greatly reduce your maintenance costs. Built in self test routines and hardware check the Operation of all major circuits each time power is turned on. Modular construction means that all circuit boards unplug (except the Main Interconnect) for easy exchange if service is required. A signature analysis mode is included to facilitate troubleshooting of the digital portion of the instrument
  
  Option 01 Adds High Accuracy Time Base (TCXO) $650
  Option 02 Deletes Pulse Head - $1100
  
  CG5001 requires either a TM5003 or TM5006.

• Nettogewicht
• 3.9 kg / 8 lb 9.4 oz (8.59 lb)

• Originalpreis
• 14,995.00 $

• Datenherkunft
• - - Manufacturers Literature

• Autor
• Modellseite von Pius Steiner angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.

• Weitere Modelle

• Hier finden Sie 386 Modelle, davon 374 mit Bildern und 92 mit Schaltbildern.
  Alle gelisteten Radios usw. von Tektronix; Portland, OR