Sampling Sweep Unit 3T77

Tektronix; Portland, OR

  • Anno
  • 1964
  • Categoria
  • Strumento da laboratorio
  • Radiomuseum.org ID
  • 206340

Clicca sulla miniatura dello schema per richiederlo come documento gratuito.

 Specifiche tecniche

  • Numero di tubi
  • 7
  • Numero di transistor
  • 21
  • Semiconduttori
  • Gamme d'onda
  • - senza
  • Tensioni di funzionamento
  • Fornita mediante altra unità o unità principale.
  • Altoparlante
  • - - Nessuna uscita audio.
  • Materiali
  • Mobile di metallo
  • Radiomuseum.org
  • Modello: Sampling Sweep Unit 3T77 - Tektronix; Portland, OR
  • Forma
  • Chassis o in scatola da montaggio
  • Dimensioni (LxAxP)
  • 4.25 x 6.25 x 14 inch / 108 x 159 x 356 mm
  • Annotazioni
  • The Type 3T77 Sampling-Sweep Plug-in Unit is designed for use in all Tektronix 560-series oscilloscopes except the models 560 and 565. It is equipped to drive a digital unit in the 567 Readout Oscilloscope. The unit is capable of variable sweep rates in fifteen steps form 0.2nsec/div to 10microsec/div. The sweep rate at any given setting of the TIME/DIV switch can be increased by about 3 times with the VARIABLE control. While still making extensive use of vacuum tubes, the Model 3T77 also incorporates advanced (for its time) tunnel diode switching in several circuits in the plug-in unit. The Nuvistor, while nominally an RCA 7586, is a specially aged tube, designated Tek part number 157-0080-00, used as a ramp-current generator in the "fast-ramp" circuit of the unit.
  • Peso netto
  • 5.75 lb (5 lb 12 oz) / 2.611 kg
  • Prezzo nel primo anno
  • 650.00 $
  • Autore
  • Modello inviato da Hank Kaczmarski. Utilizzare "Proponi modifica" per inviare ulteriori dati.

 Collezioni | Musei | Letteratura

Collezioni

Il modello Sampling Sweep Unit fa parte delle collezioni dei seguenti membri.

 Forum