Violetta W191M EL41
Tonfunk GmbH; Karlsruhe
- Country
- Germany
- Manufacturer / Brand
- Tonfunk GmbH; Karlsruhe
- Year
- 1953/1954
- Category
- Broadcast Receiver - or past WW2 Tuner
- Radiomuseum.org ID
- 75916
Click on the schematic thumbnail to request the schematic as a free document.
- Number of Tubes
- 6
- Number of Transistors
- Semiconductors
- B250C75
- Main principle
- Superheterodyne (common); ZF/IF 465/10700 kHz
- Tuned circuits
- 6 AM circuit(s) 8 FM circuit(s)
- Wave bands
- Broadcast, Long Wave and FM or UHF.
- Power type and voltage
- Alternating Current supply (AC) / 110-240 Volt
- Loudspeaker
- 2 Loudspeakers
- Material
- Bakelite case
- from Radiomuseum.org
- Model: Violetta W191M [EL41] - Tonfunk GmbH; Karlsruhe
- Shape
- Tablemodel with Push Buttons.
- Dimensions (WHD)
- 480 x 320 x 250 mm / 18.9 x 12.6 x 9.8 inch
- Notes
- W191 ist ohne Mag. Auge, das Modell W191M mit. Ratiodetektor. Gemäss Katalog hat das Modell einen Lautsprecher von 21 x 15 cm. Trockengleichrichter ist der B250C75. Im Katalog 1954/55 ist der Preis 198 DM mit Mag. Auge 218 DM.
Dieses Modell hier aus Bakelit - mit zwei Lautsprechern und der EL41 - ohne Kurzwelle, Trafo bis 240 Volt, haben wir in Katalogen nicht gefunden, doch als Exemplar 19117136 durch Bernhard Frilling, DO2BF. Danke für die Meldung mit den drei Fotos.
- Net weight (2.2 lb = 1 kg)
- 9.5 kg / 20 lb 14.8 oz (20.925 lb)
- Source of data
- Radiokatalog Band 2, Ernst Erb
- Mentioned in
- -- Schematic
- Literature/Schematics (1)
- -- Original-techn. papers.
- Author
- Model page created by Ernst Erb. See "Data change" for further contributors.
- Other Models
-
Here you find 570 models, 333 with images and 239 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
All listed radios etc. from Tonfunk GmbH; Karlsruhe
Collections
The model Violetta is part of the collections of the following members.
Forum contributions about this model: Tonfunk GmbH;: Violetta W191M
Threads: 1 | Posts: 2
Hi All,
does somebody know how to relate the numbers in the black circles in the tuning procedure to the schematic?
They seem not in line.
Thanks
Regards,
d.
Davide Rovelli, 07.Jun.21