Kenwood Solid State AM-FM Stereo Tuner KT-6005

Kenwood, Trio-Kenwood Inc.; Komagane

Data
Forum
Pictures
Collections

  • Year
  • 1973–1975
  • Category
  • Broadcast Receiver - or past WW2 Tuner
  • Radiomuseum.org ID
  • 326150
    • alternative name: Trio Corp.
    • Brand: Jennen

 Technical Specifications

  • Number of Transistors
  • Semiconductors present.
  • Semiconductors
  • Main principle
  • Superheterodyne (common)
  • Wave bands
  • Broadcast (BC) and FM or UHF.
  • Details
  • Hi-Fi equipment
  • Power type and voltage
  • Alternating Current supply (AC) / 110-120; 220-240 Volt
  • Loudspeaker
  • - For headphones or amp.
  • Material
  • Wooden case
  • from Radiomuseum.org
  • Model: Kenwood Solid State AM-FM Stereo Tuner KT-6005 - Kenwood, Trio-Kenwood Inc.;
  • Shape
  • Book-shelf unit.
  • Dimensions (WHD)
  • 435 x 153 x 300 mm / 17.1 x 6 x 11.8 inch
  • Notes

  • A hi-fi AM/FM stereo tuner with an analogue dial housed in a wooden case. With Signal and Tuning meters, indicators for AM, FM, Stereo, MPX Filter and Muting, rotary Tuning and Level controls, On/Off push button switches for MPX Filter and Muting, push buttons for AM, FM Auto and FM Mono. On the back, an adjustable ferrite bar antenna, terminals for AM and FM antennae, RCA phono sockets for Line Output, Output to a Tape recorder and for FM Multipath Output.

    Specification  
    FM SECTION  
    Antenna Impedance 300Ω balanced, 75Ω unbalanced
    Usable Sensitivity IHF 1.5µV
    Quieting Slope 55dB at 3µV
    65dB at 10µV
    70dB at 50µV
    Frequency Response 20Hz to 15kHz +0.2dB,-1.0dB
    Harmonic Distortion
    (100% mod. with 400Hz)    		 Mono < 0.3%
    Stereo < 0.5%
    S/N Ratio > 70dB
    Capture Ratio, IHF 1.3dB
    Image Rejection > 90dB
    Selectivity, IHF (Alt. channel) > 80dB
    IF Rejection > 100dB
    Spurious Signal Rejection > 100dB
    AM Suppression > 60dB
    Stereo Separation > 45dB at 400Hz
    > 38dB at 100Hz to 8kHz
    Sub Carrier Suppression > 65dB
    Output Voltage 1.5V at 100% mod. with 400Hz
    Output Impedance 10.5kΩ+
    AM SECTION  
    Antenna Built-in ferrite antenna
    External antenna terminal
    Usable Sensitivity, IHF 13µV (Ext. antenna terminal)
    300µV/m (Ferrite antenna)
    Selectivity, IHF > 35dB
    Image Rejection > 70dB
    IF Rejection > 70dB
    S/N Ratio > 50dB at 1mV input
    Output Voltage 0.15V at 30% mod. with 400Hz

    Power requirements
    110-120V, 220-240V AC 50/60Hz Switchable

    Power Consumption: 20 Watts

    Same as the Trio KT-6005 Solid State AM-FM Stereo Tuner

  • Net weight (2.2 lb = 1 kg)
  • 8.9 kg / 19 lb 9.7 oz (19.604 lb)
  • Mentioned in
  • -- Original prospect or advert (1973-74 and 1974-75 Kenwood Hi-Fi catalogues)
  • Literature/Schematics (1)
  • - - Manufacturers Literature (Schematic with Specification)
  • Author
  • Model page created by Howard Craven. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model Kenwood Solid State AM-FM Stereo Tuner is part of the collections of the following members.

 Forum