SANDA SD-4005 9-Band World Receiver KK-9

Unknown - CUSTOM BUILT: China

Data
Forum
Pictures
Collections

  • Year
  • 2020 ??
  • Category
  • Broadcast Receiver - or past WW2 Tuner
  • Radiomuseum.org ID
  • 349267

 Technical Specifications

  • Number of Transistors
  • 3
  • Semiconductors
  • Main principle
  • DSP, Digital Signal Processor
  • Wave bands
  • Broadcast, more than 2 SW bands plus FM or UHF.
  • Power type and voltage
  • Batteries / addl. power jack / AA: 2 x 1.5 / 3 Volt
  • Loudspeaker
  • Permanent Magnet Dynamic (PDyn) Loudspeaker (moving coil) / Ø 5.7 cm = 2.2 inch
  • Power out
  • 0.1 W (undistorted)
  • Material
  • Plastics (no bakelite or catalin)
  • from Radiomuseum.org
  • Model: SANDA SD-4005 9-Band World Receiver KK-9 - Unknown - CUSTOM BUILT: China
  • Shape
  • Very small Portable or Pocket-Set (Handheld) < 8 inch.
  • Dimensions (WHD)
  • 130 x 78 x 29 mm / 5.1 x 3.1 x 1.1 inch
  • Notes

  • This SANDA SD-4005 model uses the same chassis and cabinet as seen in the CMiK 9-Band World Receiver KK-9, but the PCB have no identification labels.

    It features the KT0936MB9 DSP radio chip configured to run without an additional custom setup EEPROM and the soft mute is disabled for a analog like behavior. For the SW band a S9018 transistor is used in the RF front end. The audio amplifier uses a 8002A IC.

    The fake DX/Local switch is also used here, as seen before in so many other KK-9 variants.

     

  • Net weight (2.2 lb = 1 kg)
  • 0.150 kg / 0 lb 5.3 oz (0.33 lb)
  • Author
  • Model page created by Jose Mesquita. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model SANDA SD-4005 9-Band World Receiver is part of the collections of the following members.

 Forum