TEF6686 Silver Metal Case Full Band FM-MW-SW-LW radio PE5PVB_ESP32 Based
Unknown - CUSTOM BUILT: China
- Produttore / Marca
- Unknown - CUSTOM BUILT: China
- Anno
- 2024 ?
- Categoria
- Radio (o sintonizzatore del dopoguerra WW2)
- Radiomuseum.org ID
- 356595
Clicca sulla miniatura dello schema per richiederlo come documento gratuito.
- Numero di transistor
- A semiconduttori.
- Semiconduttori
- Principio generale
- DSP, Processore di segnale digitale
- Gamme d'onda
- Onde medie (OM), lunghe (OL), piú di 2 gamme di onde corte (> 2 x OC) e MF (FM).
- Tensioni di funzionamento
- Batterie / presa di alimentazione supplementare / Li-Ion 3.7 / USB 5 Volt
- Altoparlante
- AP magnetodinamico (magnete permanente e bobina mobile) / Ø 3.6 cm = 1.4 inch
- Materiali
- Mobile di metallo
- Radiomuseum.org
- Modello: TEF6686 Silver Metal Case Full Band FM-MW-SW-LW radio PE5PVB_ESP32 Based - Unknown - CUSTOM BUILT: China
- Forma
- Tascabile (portatile molto piccola), < 20 cm
- Dimensioni (LxAxP)
- 167 x 86 x 26 mm / 6.6 x 3.4 x 1 inch
- Annotazioni
-
The TEF6686 Silver Metal Case Full Band FM-MW-SW-LW radio is one of many commercial and DIY projects, based on the original Open Source project owned by Sjef Verhoeven (PE5PVB). Several firmware variants exists, most forked from the original PE5PVB project at GitHub.
Main Specifications
- FM RDS:
- OIRT: 65.00 - 74.00 MHz
- FM: 87.5 - 108.00 MHz
- Display almost all RDS data
- LW: 144 - 513 kHz
- MW: 522 - 1791 kHz
- SW: 1700 - 27000 kHz, continuous scan, displays meter bands
- Stepping:
- AM:
- Default: 9 or 10 kHz, selectable
- Custom stepping: 1 kHz to 1 MHz, selectable.
- FM:
- Default: 50, 100, 200 kHz, selectable
- Custom stepping: 10 kHz to 10 MHz, selectable.
- AM:
- Bandwidth:
- AM: 3, 4, 6 8 kHz
- FM/OIRT: 56, 64, 72, 84, 97, 114, 133, 151, 168, 184, 200, 217, 236, 254, 287, 311, and Auto BW
- Manual and automatic scan with memory presets
- S-meter and Modulation indicators
- Single antenna socket for all bands (no internal magnetic antenna)
- 3.2" Color LCD (without touch screen - Some variants include it)
- Multi-language support (list depends on the firmware distribution and version)
- Support firmware updates (requires connection to a computer)
- Stock firmware (year 2024) is a proprietary distribution V1.18
- Built-in 5000mAh rechargeable battery
- USB-C port for computer connection and Battery charging
- 3.5mm Stereo jack for earphones
- Internal WIFI antenna (inactive by default, depends on firmware support and setup)
Brief technical details
This radio is based on a TEF6686-F8602 DSP chip by NXP, managed by a ESP32-WROOM-32U Module by ESPRESSIF for management and WIFI/BT support. A non identified VLSI chip is hidden behind the CL32BC1018-40A Color LCD. The later uses a 40-pin interconnect cable and is probably using the common ILI9341 driver chip.
A AYK/TPA6211A1 3.1W Mono Fully Differential Audio Power Amplifier chip by TI drives the 4 Ohm speaker. The earphones jack is driven by a AIF/MAX97220A Differential Input DirectDrive Headphone Amplifier chip by MAXIM.
Additional active devices are used, like a DE=911/RT9193-33PB 3.3V LDO by RICHTEK dedicated to the NXP Tuner chip, two more DE=911/RT9193-33PB chips for the ESPRESSIF chip, a TP4056 battery charger, a 340EB39/CH340E USB-Serial by WCH, and a 3Y/S8050 NPN transistor.
- FM RDS:
- Peso netto
- 0.5 kg / 1 lb 1.6 oz (1.101 lb)
- Autore
- Modello inviato da Jose Mesquita. Utilizzare "Proponi modifica" per inviare ulteriori dati.
- Altri modelli
-
In questo link sono elencati 528 modelli, di cui 507 con immagini e 29 con schemi.
Elenco delle radio e altri apparecchi della Unknown - CUSTOM BUILT: China
Collezioni
Il modello TEF6686 Silver Metal Case Full Band FM-MW-SW-LW radio fa parte delle collezioni dei seguenti membri.
Discussioni nel forum su questo modello: Unknown - CUSTOM: TEF6686 Silver Metal Case Full Band FM-MW-SW-LW radio PE5PVB_ESP32 Based
Argomenti: 1 | Articoli: 1
This TEF6686 Silver Metal Case radio is sold as being a 2nd generation full band radio by some Chinese shops, and ships with a proprietary firmware V1.18.
It is characterized as having three colored buttons without labels at the front (Red, Yellow, Blue) and two rotary knobs at the right side (Encoder at the top and volume potentiometer at bottom).
Other variants have three rotary knobs at the right side, where the middle one is for Squelch control that several users find useless in this type of radio.
The functions assigned to the colored buttons varies depending on the firmware distribution. Hence these radios dont have labels on them.
This particular model variant was shipped with a proprietary firmware V1.18 (as of aug-2024). During boot, the radio will show this screen for a moment:
As these chassis series runs the original PE5PVB/TEF6686_ESP32 Open Source firmware created by Sjef Verhoeven, I have done what many others have done and installed the latest available version 2.11 from the GitHub repository to benefit from continuous bug fix and improvements. Boot info:
Jose Mesquita, 30.Sep.24