Reel to Reel Tape recorder VTT

Model VTT Reel to Reel Tape recorder with a Truvox Tape Deck.

The amplifier can be used alone, and the output fed to headphones while recording or to drive additional amplifiers.

A special model is available with tape units with monitoring heads. As well as being able to monitor before and after recording, music, speech or echo can be added.

• Total power consumption, 53 watts on recording, 48 watts on playback.
• Extremely low distortion and background noise, with a frequency response of 50 c/s-10 Kc/s, ±1.5 dB.
• A meter is included for the measurement of signal level and bias level.
• Sufficient power is available for recording on to disc, either direct or from the tape, without additional amplifiers.
• The 15 to 30-ohms microphone balanced line input is fully loaded with 20 microvolts.
• Input 1, which requires 35 millivolts on 0.5 megohms, is suitable for crystal pickup microphones or radio inputs.
• A power plug is provided for a radio feeder unit, etc.
• Variable bass and treble controls are fitted for control of the playback.
• The power output is 3.5 watts heavily damped by negative feedback.
• An oval speaker is built in for monitoring purposes.

See Model VWT with Wearite Tape Deck.

Here you find 23 models, 20 with images and 1 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
All listed radios etc. from Vortexion Ltd.; Wimbledon