Standard Frequency Receiver RHF-1

Wayne Kerr; New Malden, England

  • Anno
  • 1964 ??
  • Categoria
  • Strumento da laboratorio
  • Radiomuseum.org ID
  • 338648

Clicca sulla miniatura dello schema per richiederlo come documento gratuito.

 Specifiche tecniche

  • Numero di transistor
  • A semiconduttori.
  • Semiconduttori
  • Gamme d'onda
  • Gamme d'onda nelle note.
  • Tensioni di funzionamento
  • Rete / Batterie (ogni tipo) / AC: 115; 220 / DC: 12 Volt
  • Altoparlante
  • AP magnetodinamico (magnete permanente e bobina mobile)
  • Materiali
  • Mobile di metallo
  • Radiomuseum.org
  • Modello: Standard Frequency Receiver RHF-1 - Wayne Kerr; New Malden,
  • Forma
  • Rack
  • Dimensioni (LxAxP)
  • 7 x 3 x 13 inch / 178 x 76 x 330 mm
  • Annotazioni
  • This instrument is suitable for the checking of oscillator calibration to an accuracy of up to one part in 107.
     

    Beat frequencies may be observed by the connexion of oscilloscopes to output terminals provided on the rear of the instrument.

    Operating frequencies are normally 2.5, 5,10,15,20, and 25 MHz, but up to three frequencies between 2.5 and 25 MHz may be added.

    The usable sensitivity is 1 µV, and the signal plus noise-to-noise ratio is better than 10 dB at 3 µV input.

    All particular characteristics are in the original attached article.

  • Bibliografia
  • Electronic Engineering, volume 36, January 1964.
  • Autore
  • Modello inviato da Pier Antonio Aluffi. Utilizzare "Proponi modifica" per inviare ulteriori dati.

 Collezioni | Musei | Letteratura

 Forum