Voltage Transformer T101V

Wayne Kerr; New Malden, England

  • Jahr
  • 1962
  • Kategorie
  • Unterrichts- / Lehrmittel
  • Radiomuseum.org ID
  • 332695

Klicken Sie auf den Schaltplanausschnitt, um diesen kostenlos als Dokument anzufordern.

 Technische Daten

  • Wellenbereiche
  • - ohne
  • Betriebsart / Volt
  • Wechselstromspeisung
  • Lautsprecher
  • - - Kein Ausgang für Schallwiedergabe.
  • Material
  • Metallausführung
  • von Radiomuseum.org
  • Modell: Voltage Transformer T101V - Wayne Kerr; New Malden,
  • Form
  • Tischgerät ohne Drucktasten, bis 35 cm Breite (Kleingerät, meist dekorativ. Nur für Netzbetrieb, doch Transportgriff möglich).
  • Bemerkung
  • The voltage and current transformers incorporated in the Wayne Kerr Universal Bridge B221 are available as separate units.

    Known as the T101V and T102C, the transformers are intended primarily for use in technical colleges and similar establishments to familiarize future engineers with high accuracy measuring devices. The two components are fitted in separate cases with low-impedance
    connexions brought to sockets for wander leads and high-impedance points connected to panel-mounted B.N.C. sockets. Connexions allow all normal standards, unknown components, correction circuits and trimming components to be included in the overall circuit without additional terminal panels.

    They enable transformer ratio-arm bridge circuits to be constructed in 'bread-board' fashion and can be operated at any frequency from 50Hz to 20kHz.

    This T101V voltage ratio transformer has six separate neutral sockets, taps for 1 to 10 turns are duplicated and the B.N.C. sockets are connected to 1, 10, 100 and 1,000 turns respectively. A flying lead is provided for the source.

  • Literaturnachweis
  • Electronic Engineering, volume 34, July 1962
  • Autor
  • Modellseite von Pier Antonio Aluffi angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.

 Sammlungen | Museen | Literatur

 Forum