• Jahr
  • 1960 ??
  • Kategorie
  • Lautsprecher, Kopfhörer oder Ohrhörer
  • Radiomuseum.org ID
  • 201197

 Technische Daten

  • Anzahl Transistoren
  • 4
  • Halbleiter
  • Hauptprinzip
  • NF-Verstärkung; kein Zusatz
  • Wellenbereiche
  • - ohne
  • Spezialitäten
  • Lautsprecher mit NFV (Aktiv-LS)
  • Betriebsart / Volt
  • Gleichstromnetz-Gerät / 24; 48; 12 & 30 Volt
  • Lautsprecher
  • Dynamischer LS, keine Erregerspule (permanentdynamisch) / Ø 9.8 cm = 3.9 inch
  • Belastbarkeit / Leistung
  • 0.5 W (Qualität unbekannt)
  • Material
  • Metallausführung
  • von Radiomuseum.org
  • Modell: 106A - Western Electric Company Inc.;
  • Form
  • Tischmodell, Zusatz nicht bekannt - allgemein.
  • Abmessungen (BHT)
  • 5.5 x 6.3 x 4.6 inch / 140 x 160 x 117 mm
  • Bemerkung
  • Screw-terminal board selects: power supply voltage (24VDC (0.130 amp), 48VDC (0.088 amp) or 12 with 30 VDC, input and output impedances (1.5, 600 or 2400 ohm), internal (3.2 ohm) or external speaker, enable/disable/remote (10K ohm) volume control, enable/disable on/off switch. Has internal gain pot in addition to front panel volume control; max gain 66dB. Max output 0.5W into 3.2 ohms. Other variants (106C-E) have automatic output level control (up to 35 dB). Removeable KS-16728-L1 amplifier board has 4 RCA type 2N270 transistors with push-pull output and no interstage transformer. The 106D-F variants use a pair of Western Electric 12M transistors and two 2N4036 push-pull drivers. All AT&T documentation I have show 106A-C using a pair of WE 12M transistors and two WE 12H push-pull drivers. AT&T documents don't show the RCA 2N270 transistors in the unit I have.
  • Nettogewicht
  • 5 lb (5 lb 0 oz) / 2.270 kg
  • Literaturnachweis
  • - - Manufacturers Literature
  • Autor
  • Modellseite von Gary Brandenburger angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.

 Sammlungen | Museen | Literatur

Sammlungen

Das Modell 106A befindet sich in den Sammlungen folgender Mitglieder.

 Forum